+31 (0)72 - 54 01 001

TPH30T-2M air-hydraulic jack 30T - Two-stage 15 cm - 40.9 cm lift height. For commercial use! Portable, weighs 24 kg

Portable air hydraulic jack, ideal to keep in your own vehicle.
With a short chassis and weighing only 24 kg, this portable jack is unique. It can easily be carried and used in any location.
The handle can be collapsed and acts as a carrying arm.

The lifting power of the two heavy-duty pistons on the TyreON TPH30T-2M is rated for 30 tonnes at half height and 15 tonnes at full extension, which is truly impressive.
With a minimum height of just 15 cm, practically any jacking point can be reached. This allows an entire range of vehicles to be jacked up.
With a maximum jacking height of almost 41 cm, it can also be used on vehicles with high axles.

The TyreON TPH30T-2M can be used for safely lifting heavy trucks, trailers, buses, construction vehicles and agricultural vehicles.

This hydraulic jack requires compressed air from an air compressor to lift heavy loads up to 30 Tonne.
TyreON jacks are easy to operate and are featured with divers safety options as dead man’s joystick which also aids controlled lowering speed.

Technical features and quality


  • Compact, quality portable air hydraulic jack with short chassis, two large rubber wheels and extendable handle
  • Top-class powder-coated construction throughout, with stylish and functional design
  • Minimum jacking height 15 cm with narrow profile of just 18 cm
  • The jack weighs only 24 kg and the handle doubles as a carrying arm
  • Operates with reliable hold-to-run joystick on the handle
  • Quick-release coupling for (dis)connecting the air hose
  • The jack can be moved, manoeuvred, raised and dropped using the handle
  • A foot pedal allows you alter the handle position
  • The handle locks into four positions: 45º - 90º - 180º and the carrying position
  • The 67.5 cm-long handle can be extended to 130 cm
  • With a total length of more than 164.5 cm, the TPH30-T2M has a long reach
  • Rubber hand grips
  • Optimum stability with wide base
  • The robust chassis is made from 4.5 mm steel plate and provides ultimate protection of the internal parts
  • Internally and externally hard-chromed cylinders prevent wear and corrosion
  • Each cylinder is fitted with two seals to prevent any oil loss
  • Fast lifting by means of pneumatic high-pressure pump
  • Oil reservoir on the chassis has screw top for ease of topping up hydraulic fluid
  • Comes with 2 extensions to close gap between the saddle of the jack and the jacking point

Portable air hydraulic jack intended for frequent commercial use


TyreON air hydraulic jacks are used by garages, workshops, tyre service stations, fleet owners, truck dealers, truck maintenance and (mobile) services and transport companies, and on agricultural vehicles, construction machinery, and heavy equipment and ground work vehicles.

Heavy duty

These robust, durable and portable jacks from TyreON have been designed and made for frequent commercial use.
With their solid construction and use of heavy-duty steel plate, the TyreON TPH30T-2M is able to withstand knocks.
The jacks have a long working life due to quality checks during production, technical specifications and the use of the best materials.


Dead man's safety feature
To ensure optimum safety, the portable jack immediately turns off if you let go of the joystick.

Can be used in all situations
The portable truck jack can be used both inside and outside in the most demanding conditions, and can also be used safely on ground that is not completely flat or on a slight incline.
Metal expands and contracts with variations in temperatures. TyreON portable truck jacks will not fail in extremely low or high temperatures.

Factory-tested in our Quality Centre
The Quality Centre carries out stringent quality control checks on the jack during every stage of the manufacturing process.
The portable air hydraulic jack is tested under load from -25° C to + 45° C and is also subjected to static and dynamic off-centre load tests to guarantee safe operation.

Certified
CE-certified to comply with current regulations, including:
EN 12100:2010 Safety of Machinery + EN 1494:2000+A1: 2008 Mobile or Movable Jacks

Functionality – Portable air hydraulic jack


Excess-pressure valve
The excess-pressure valve prevents damage due to an overload.

Fast lift to jacking point
The TyreON TPH30T-2M is fitted with a system that allows the lifting cylinders to be raised to the jacking point quickly and then also to be dropped rapidly once without load.

Locked position and lift evenly
The non-return valves guarantee a locked position for loads at any height and a controlled even high lift rate under load.

Equalized descent
A reduction valve ensures equalized and smooth descent, even under heavy load.

Oil circulation
As the hose, cylinder and oil reservoir are interlinked, the oil circulates and cannot be released, even if the jack should be positioned on its side.

Information-request


Do you wish to know more about the TPH30T-2M air-hydraulic jack 30T . Please complete the following form and we will send you, without any obligation, the requested information. Information request
 

Price - € 1.100,-
Excluding VAT and shipping costs.

Look here for an indication of shipping costs.

The techniques and possibilities of the TyreON TP30T-2M Portable air hydraulic jack

 

 

 

 

TyreON Draagbare lucht hydraulische garagekrik 30T

 


Technical information TPH30T-2M

Portable air hydraulic jack

     
         
Maximum capacity  30 Tonne      
Weight per stage - number of stages 30T - 15T 2-stage jack    
         
Minimum height 150 mm    
Lifting height 289 mm    
Maximum height with 2 extensions 409 mm    
Size of the 2 extensions 75 + 45 mm    
         
Stage 1    30T 73 mm    
Stage 2    15T 66 mm    
Total stroke 139 mm    
         
Weight 24 kg    
Width of the base - profile 180 mm    
Width including wheels 280 mm    
Chassis length 510 mm    
Length of the bar - extension attached 675 - 1300 mm    
Total length of the truck jack - extension attached 1020 - 1645 mm    
         
Required air pressure 9-12  (0.9-1.2) Bar  (Mpa)    
Air consumption 300         Litre/minute    
       

Ordering the portable air hydraulic jack


Order online – Supplied from stock
The TyreON TPH30T-2M can be ordered online from our webshop and will be delivered to you within a few days.

Final testing
Every portable air hydraulic jack is fully tested at the factory before being packed along with its documentation, ready for dispatch!

Guarantee and TyreCARE
TyreON extra-low air hydraulic jacks come with a one-year guarantee.
TyreCARE means that even after the warranty period expires, we stand ready to assist you with technical support and information.

Included in your order
  • TPH30T-2M portable air hydraulic jack with wheels and handle
  • 60 cm extension piece for handle
  • Pre-filled with hydraulic fluid
  • 75 mm and 45 mm extension attachments
  • Instructions for use and CE certificate
  • Packed weight is 25 kg, dimensions are L 70 x W 30 x H 28 cm


4 models air hydraulic jacks available from stock


Capacity 30 Ton - Height  15 - 40.9 cm - Portable (24 kg)
TyreON TPH30T-2 Portable air hydraulic jack

Capacity 40 Ton - Height  12.5 - 40.4 cm
TyreON TPH40T-3 Air operated hydraulic jack

Capacity 60 Ton - Height  15 - 44.7 cm
TyreON TPH60T-3 Air hydraulic floor jack

Capacity 60 Ton - Height  15 - 51.3 cm
TyreON TPH60T-4 Pneumatic hydraulic jack


Draagbare lucht hydraulische garagekrik