TPH60T-3 air-hydraulic jack 60T - Three-stage 15 cm - 44.7 cm lift height and long reach - For intensive commercial use!

 

Air hydraulic floor jack with 3 heavy-duty pistons rated for 60T maximum.
This three-stage 60T-40T-20T long-floor jack can be used for safely lifting, construction vehicles and agricultural vehicles, heavy trucks, trailers, buses.

With a minimum height of 15 cm, almost every lifting point is accessible, that allows an entire range of vehicles to be jacked up.
With a jacking height of almost 45 cm, machines and vehicles with high axles can be raised.

This hydraulic jack requires compressed air from an air compressor to lift heavy loads up to 60 Tonne.
TyreON jacks are easy to operate and are featured with divers safety options as dead man’s joystick which also aids controlled lowering speed.

 

Technology -  Quality - Air hydraulic floor jack

• Quality jack with two large rubber wheels plus a long handle with soft rubber grips
• First-class attractive and functional powder coating on entire construction
• With a minimum jacking height 15 cm and a narrow profile
• Equipped with reliable hold-to-run joystick
• Shortcut for quick coupling and decoupling of the air hose
• The jack can be manoeuvred, moved, raised and dropped using the handle
• The handle can be locked in 3 ways;  45º-90º-180º
• The TPH60T-3 has a long 222.5 cm reach
• Increased load stability with wider base
• The strong chassis is made from 4.5 mm steel plate and gives ultimate protection for the internal parts
• Hard-chrome cylinders resistant to wear and corrosion - Internal and external!
• All cylinders are fitted with two seals to prevent any oil loss
• Quick lifting by means of pneumatic high-pressure pump
• 2 supports on the side of the chassis for the extensions
• The chassis comes with a hinged clamp and a screw cap for easy oil change
• Comes with 2 extensions to close gap between the saddle of the jack and the jacking point

Air hydraulic floor jack intended for intensive commercial use

TyreON pneumatic hydraulic jacks are used by truck dealers, fleet owners, garages, workshops, tire services and trade, truck maintenance and (mobile) services, transport companies and the agricultural, heavy machinery and groundwork sectors.

Heavy Duty
This durable heavy duty jack is designed and made for intensive professional use. With the sturdy construction and the application of very thick sheet steel, the TPH60T-3 is able to withstand knocks.
The jacks have a long working life due to quality checks during production, technical specifications and the use of the best materials.

With safe dead man's operation
To ensure optimum safety, the workshop jack turns off and stops immediately when the hold-to-run joystick is released.

Application under any circumstances
The workshop jack can be used both outdoors and indoors under severe conditions and can also be used safely on ground that is not completely flat or on a slight incline.
Metal expands and contracts with variations in temperatures. Our truck jacks will not fail in extremely low or high temperatures.

Factory Test - Quality Centre
The Quality Centre carries out stringent quality control checks on the jack during every stage of the manufacturing process.
This garage jack was tested at -25 °C to + 45 °C and dynamic and static off-centre load tests were conducted to ensure safety.

CE Certified
CE-approved for all current requirements;
EN 12100:2010 Safety of Machinery + EN 1494:2000+A1:2008 Mobile or Move-able Jacks