+31 (0)72 - 54 01 001

TyreON TPL4500 four post lift - Automatic four post car lift 4.5 tons also suitable for wheel alignment.

ALL ROUND – 4 post lift suitable for:


  • Light commercial vehicles
  • Buses, vans and delivery vans
  • All cars with longer chassis
  • All passenger cars, sporting and luxury cars
  • SUV’s and vintage cars

 

Professionel four post car lift


Heavy duty professional electric-hydraulic 4 post car lift.
With a runway length of 480 cm and a 52 cm width of the runways it can lift everything from small passenger to long delivery vans.
The control unit with main switch and up-down push buttons is positioned on the column.

This lift only requires a 400 V/3 phase power supply to be fully operational; the same is true for the optional hydraulic jacking beam.


Also for wheel alignment


Also Wheel alignment can be carried out on the lift. There is room for two turn plates for front-wheel alignment.
For the rear wheels, there are two rear sliding plates, which are operationally after unlocking.
The distance between the two runways is adjustable so any car can be positioned centrally.
The two optional turn plates and 2.5 ton hydraulic jacking beam for wheel alignment can be included in your order.

Complete with 2 turn plates and a2.5 ton hydraulic jacking beam for € 3.500,- excluding VAT


You pay € 3.500,- instead € 3.700,- at an order of the TyreON TPL4500 4 post lift complete with a 2.5 ton hydraulic jacking beam and two turn plates.

TyreON TPL4500 - Automatic


  • Professional heavy-duty version with reinforced ramps and runways, thick anchoring plates and 4 heavy columns made of rolled sections
  • Hinged long approach ramps with anti-slip profile
  • Runways with anti-slip profile
  • Minimum height of 22 centimetres
  • Convenient 24 V controller with main switch and up-down push buttons
  • Adjustable distance between the runways
  • On both the runways turning plates can be placed (alignment-front wheels)
  • Both the runways are standard fitted with sliding plates (alignment-rear wheels)
  • With a power full hydraulic cylinder attached underneath the runway, perfectly protected
  • With this hydraulic cylinder, the lift runs quietly and smoothly
  • With large hardened steel maintenance free pulleys preventing wear on cables and pulleys
  • The descending speed of the lift is adjustable

Safety


Reliable safe lift, manufactured in accordance with ISO 9001 with CE certificate.
Meets the requirements of main European regulations.
24 V Height limit switch and automatic mechanical 4 point locking on each 8.5 cm.
Mechanical synchronisation ensures both the ramps are lifted and lowered at exactly the same time.
Pressure relief valve on the power unit as overload prevention.
Steel cable break device and equipped with a bar so the car can’t drive or roll off.
All the control functions as well as the electrical circuit on the lift are 24 Volt.
Extra safety: A safety handle must first be pushed before the down-button will function.

Information-request


Do you wish to know more about the TyreON TPL4500 four post lift . Please complete the following form and we will send you, without any obligation, the requested information. Information request
 

Price - € 2.800,-
Excluding VAT and shipping costs.

Look here for an indication of shipping costs.

The techniques and possibilities of the TyreON TPL4500

 

 

 


Figuur 1: Dimensions TyreON TPL4500
     
 


Technical specifications four column car lift

       
Lifting capacity of the hydraulic lifting system 4500 kg   (4610 kg without the hydraulic lift jack)
Maximum lifting height 1800 mm    
Runway length 4800 mm    
Length of the approach ramp 950 mm    
Space between columns 285 cm  
Width of the runways 520 mm    
Distance between the runways 860 - 1200 mm   adjustable
Minimum height 220 mm    
Total length 6010 mm    
Total width 3310 mm    
Column / post height 2120 mm    
Time for lifting / lowering 50 / 20 sec   (descent rate can be set)
Voltage 400 Volt    
Phases 3 Ph    
Motor power 2.2 kW    
Fuse 16 A    
Weight (approx.) 1400 kg    


Technical specifications hydraulic jacking beam

       
Lifting capacity 2500 kg    
Maximum lifting height 450 mm    
Drive Hydraulisch      
Dimensions of table 800 x 250 mm   (length x width)
Length of extended table 1740 mm    
Weight (approx.) 110 kg    

Delivery includes


  • Four post car lift including aluminium shell motor with cooling fan
  • Safety first, 24V simple control unit with main switch and up-down push buttons
  • Set of anchoring bolts for mounting to the floor
  • Installation and operating instructions and CE certificate
  • Packed in a steel transport frame around 1500 kg and 510x56x73 (LxWxH/cm)
  • 1 year warranty on parts

Optional :

  • 2.5 Ton hydraulic jacking beam
    Price: € 700, - excl. VAT
    Including 4 rubber recording blocks
    Packed in wooden crate, around 120 kg and 95x60x28 (LxWxH/cm)

  • Two turn plates
    Price: € 200,- excl. VAT
    Packaged in carton, around 10 kg and 45x45x15 (LxWxH/cm)

€ 200,- discount on the complete set


You pay € 3.500,- instead € 3.700,- at an order of the TyreON TPL4500 4 post lift complete with a 2.5 ton hydraulic jacking beam and two turn plates.