- All products
- Package offers
- Truck - Farm and heavy equipment
- Truck tyre changers
- Truck tyre changers mobile
- Truck wheelbalancers + car + bike
- Truck air hydraulic jacks
- Truck mobile column lifts
| Rims | 14 - 60 Inch |
| Wheels up to | 2250 kg - Ø 265 cm - 145 cm ↔ |
| Mounting speed | 2-speed | 4 + 8 rpm |
| Bead breaker force | 5000 up to 8000 kg |
| Operation | Electric-hydraulic |
| Gear motor-chuck | 3.3 - 4.0 kW |
| Hydraulic pump | 3.3 - 4.0 kW |
| ► | Hydraulic rotating mounting head |
| ► | 2nd hydraulic gear |
| ► | Mounting arm + chuck perfectly tangent |
| ► | 2 carriages - horizontal movement of both the chuck and mounting arm |
| ► | Carriage for up and down sliding movement of the chuck |
| In wooden box | L231 x W208 x H110 cm - 1750 kg |
| Voltage | 400V (no compressed air required) |
| Including | Free accessoires |
| Rims | 14 - 56 Inch |
| Wheels up to | 2000 kg - Ø 250 cm - 120 cm ↔ |
| Mounting speed | 2-speed | 4 + 8 rpm |
| Bead breaker force | 5000 up to 8000 kg |
| Operation | Electric-hydraulic |
| Gear motor-chuck | 3.3 - 4.0 kW |
| Hydraulic pump | 3.3 - 4.0 kW |
| ► | Hydraulic rotating mounting head |
| ► | 2nd hydraulic gear |
| ► | 2 carriages - horizontal movement of both the chuck and mounting arm |
| ► | Operated with wireless controller or the wired controller |
| In wooden box | L231 x W208 x H110 cm - 1300 kg |
| Voltage | 400V (no compressed air required) |
| Including | Wireless controller, cable controller and free accessories |
| Rims | 14 - 56 Inch |
| Wheels up to | 2000 kg - Ø 250 cm - 120 cm ↔ |
| Mounting speed | 2-speed | 4 + 8 rpm |
| Bead breaker force | 5000 up to 8000 kg |
| Operation | Electric-hydraulic |
| Gear motor-chuck | 3.3 - 4.0 kW |
| Hydraulic pump | 3.3 - 4.0 kW |
| ► | Hydraulic rotating mounting head |
| ► | 2nd hydraulic gear |
| ► | 2 carriages - horizontal movement of both the chuck and mounting arm |
| In wooden box | L231 x W208 x H110 cm - 1300 kg |
| Voltage | 400V (no compressed air required) |
| Including | Free accessoires |
| Rims | 14 - 42 Inch |
| Wheels up to | 1600 kg - Ø 230 cm - 105 cm ↔ |
| Mounting speed | 2-speed | 5 + 10 rpm |
| Bead breaker force | 3300 kg / 32.360 kN |
| Operation | Electric-hydraulic |
| Gear motor-chuck | 3.3 - 4.0 kW |
| Hydraulic pump | 2.2 kW |
| Optional | 56 Inch extensions |
| In wooden box | L223 x W194 x H105 cm - 850 kg |
| Voltage | 400V (no compressed air required) |
| Including | Free accessoires |
| Rims | 14 - 42 Inch |
| Wheels up to | 1600 kg - Ø 230 cm - 105 cm ↔ |
| Mounting speed | 1-speed | 5 rpm |
| Bead breaker force | 3300 kg / 32.360 kN |
| Operation | Electric-hydraulic |
| Gear motor-chuck | 2.2 kW |
| Hydraulic pump | 2.2 kW |
| Optional | 56 Inch extensions |
| In wooden box | L215 x W185 x H105 cm - 820 kg |
| Voltage | 400V (no compressed air required) |
| 230V/1Ph - available on order (25A) | |
| Including | Free accessoires |
| Rims | 14 - 26 Inch |
| Wheels up to | 500 kg - Ø 160 cm - 78 cm ↔ |
| Mounting speed | 2-speed | 7 + 15 rpm |
| Bead breaker force | 3000 kg / 29.418 kN |
| Operation | Electric-hydraulic |
| Gear motor-chuck | 2.4 - 3.0 kW |
| Hydraulic pump | 2.2 kW |
| Model | Compact |
| In wooden box | L183 x B149 x H109 cm - 670 kg |
| Voltage | 400V (no compressed air required) |
| Including | Free accessoires |
| Rims | 14 - 26 Inch |
| Wheels up to | 500 kg - Ø 160 cm - 78 cm ↔ |
| Mounting speed | 1-speed | 9 rpm |
| Bead breaker force | 2500 kg / 24.515 kN |
| Operation | Electric-hydraulic |
| Gear motor-chuck | 2,2 kW |
| Hydraulic pump | 1,5 kW |
| In wooden box | L200 x B158 x H95 cm - 650 kg |
| Voltage | 400Vor 230V (no compressed air required) |
| Including | Free accessoires |
.jpg)
| Rims | 19 - 26 Inch |
| Wheels up to | 380 kg - Ø 140 cm - 47 cm ↔ |
| Mounting speed | 1 speed - 6 rpm |
| Bead breaker force | 3500 kg / 34.323 kN |
| Operation | Fully hydraulic |
| Hydraulic pump | 3.3 kW - 250 bar |
| Model | Compact - vertical |
| Comes with | Alu-clamping ring |
| 2 bead pressing rollers | |
| In wooden box | L120 x W120 x H180 cm - 550 kg |
| Voltage | 400V (no compressed air required) |
| Including | Free accessoires |
| Rims | 13 - 26 Inch |
| Wheels up to | 550 kg - Ø 140 cm - 78 cm ↔ |
| Mounting speed | 1-speed | 9 rpm |
| Bead breaker force | 3500 kg / 34.355 kN |
| Operation | Electric Hydraulic |
| Gear motor-chuck | 2.2 kW |
| Hydraulic pump | 2.2 kW |
| Model | Compact |
| ► | Hydraulic extendable mounting arm |
| ► | 2nd speed for hydraulic movements |
| ► | Mounting arm + chuck perfectly tangent |
| ► | 2 carriages - horizontal movement of both the chuck and mounting arm |
| ► | Joystick and foot operated control |
| In wooden box | L160 x W145 x H97 cm - 880 kg |
| Voltage | 400V (no compressed air required) |
| Including | Free accessoires |
| Rims | 14 - 60 Inch |
| Wheels up to | 3100 kg - Ø 310 cm - 181 cm ↔ |
| Mounting speed | 3-speed | 4 + 6 + 10 rpm |
| Bead breaker force | 8000 kg / 78.453 kN |
| Operation | Fully hydraulic |
| Hydraulic pump | 2-speed |
| Stand-by function | Motor turns off after 30 sec. no use |
| ► | Hydraulic rotating mounting head |
| ► | 2nd hydraulic gear |
| ► | Wireless controller , rechargeable, portable and mobile |
| ► | 2 carriages with independent horizontal movement of chuck and mounting arm |
| ► | Chuck - hub upward of 11 cm |
| ► | Chuck - inlays for ALU truck rims |
| ► | Chuck - specially for wider rim clamping earthmoving equipment |
| In wooden box | L299 x B229 x H133 cm - 2400 kg |
| Voltage | 400V (no compressed air required) |
| Including | Free accessoires |
| Noise level | 70 dB(A) |
| Capacity | 4000 kg - On floor |
| Liftheight | 188 cm |
| Runway LxW | 450 cm x 65 cm |
| Drive motor | 3 kW |
| 2nd Scissor | 3.5T - H42cm - L150 -- 195 cm |
| ► | LED runway lighting with protection grilles |
| ► | 61 cm ramps |
| ► | Hose set + floor covers |
| ► | IR synchronization monitoring |
| Drive-on height | 12.8 cm |
| Foundation | C20/25 - 525 x 280 x 20 cm |
| Lifting/Lowering | 60 s |
| Voltage | 400V |
| Packaging | L455 x B80 x H50 cm - 2525 kg (scissorlift) |
| L50 x B50 x H110 cm - 75 kg (controller) |
.jpg)
| Rims | 13 - 26 Inch |
| Wheels up to | 750 kg - Ø 138 cm - 70 cm ↔ |
| Mounting speed | 1-speed | 7 rpm |
| Bead breaker force | 2500 kg / 24.515 kN |
| Operation | Electric-hydraulic |
| Gear motor-chuck | 1.5 kW |
| Hydraulic pump | 1.1 kW |
| Model | Mobile - to install in van |
| Height cargo floor | About 55 - 75 cm |
| In wooden box | L125 x B110 x H155 cm - 500 kg |
| Including | Free accessoires |
| Optional | T650M2-CMA5 mounting arm passenger cars |
| Installation | Side or rear of a vehicle |
| Application | Truck tires, super singles, passenger car tires |
| Voltage | 400V (no compressed air required) |
| ►13- 26 Inch Mobile tyre changer | |
| ►8,3 kVA Generatorset / E-Start / Smart control | |
| ►Air compressor 10 Bar / Hose reel / Inflation gun | |
| Rims | 11 - 26 Inch |
| Wheels up to | 1200 kg - Ø 150 cm - 100 cm ↔ |
| Mounting speed | 1-Speed | 8 rpm |
| Bead breaker force | 2500 kg / 24.515 kN |
| Operation | Electric-hydraulic |
| Gear motor-chuck | 1.5 kW |
| Hydraulic pump | 1.1 kW |
| Model | Mobile - to install in van |
| Height cargo floor | About 25 - 75 cm |
| In wooden box | L130 x B81 x H166 cm - 475 kg |
| Including | Wired controller, 230V battery charger and free accessoires |
| Installation | Side or rear of a vehicle |
| Application | Truck tires, super singles, tires agricultural vehicles / construction machinery |
| Installation | Side or rear of a vehicle |
| Voltage | 400V (no compressed air required) |
| Including | Free accessoires |
| Rims | 13 - 26 Inch |
| Wheels up to | 750 kg - Ø 138 cm - 70 cm ↔ |
| Mounting speed | 1-speed | 7 rpm |
| Bead breaker force | 2500 kg / 24.515 kN |
| Operation | Electric-hydraulic |
| Gear motor-chuck | 1.5 kW |
| Hydraulic pump | 1.1 kW |
| Model | Mobile - self installation set complete |
| Comes with | Aircompressor + hose reel |
| Genset + Smart Control | |
| Optional | Mounting arm for passenger cars |
| Voltage | 400V |
| Instrallation | Side of a vehicle |
_clipped_rev_1.jpeg)
| Rim diameter | 10 - 32 Inch |
| Wheels | 200 kg - Ø 120 cm |
| Wheel lift - integrated | 200 kg - 40,5 cm |
| Balancing modes | Static and dynamic |
| Programs | 10 - Steel and aluminium |
| ► | Automatic brake |
| Delivery includes | Cones for trucks |
| Cones for cars | |
| Packed in wooden crate | L115 x W85 x H115 cm - 360 kg |
| Voltage | 230V |
.jpg)
| Rim diameter | 10 - 32 Inch |
| Wheels | 150 kg - Ø 120 cm |
| Wheel lift | 150 kg - 40,5 cm |
| Balancing modes | Static and dynamic |
| Programs | 8 - Steel and aluminium |
| ► | Stops automatically |
| ► | Brake pedal |
| Delivery includes | Cones for trucks |
| Packed in wooden crate | L125 x W96 x H112 cm - 320 kg |
| Voltage | 230V |
.JPG)
| Wheel diameter | 165 cm - 65 Inch |
| Wheel width | 80 cm - 31,5 Inch |
| ► | 6 stage - 10 Bar automatic tire inflator |
| ► | Safety door |
| ► | Stop-switch (door) |
| Packed | L186 x B88 x H85 cm - 285 kg (wooden box) |
| Voltage | 230V |
| Capacity | 1500 kg |
| Lifting range | 0 - 9,5 cm |
| Wheel diameter | Ø 100 - 220 cm |
| Wheel width | Up to 80 cm |
| Length rollers | 50 cm |
| Own weight | 140 kg |
| ► | Robust, professional |
| ► | Mobile - 4 Swivel caster wheels - 2 with brake |
| Package | L131 x W47 x H32 cm - 133 kg |
| Capacity | 1500 kg |
| Lifting range | 0 - 9,5 cm |
| Wheel diameter | Ø 100 - 220 cm |
| Wheel width | Up to 110 cm |
| Length rollers | 70 cm |
| Own weight | 157 kg |
| ► | Robust, professional |
| ► | Mobile - 5 Swivel caster wheels - 2 with brake |
| Package | L133 x B113 x H34 cm - 165 kg |
 (2).jpg)
| ALU clamping jaws | For alumium truck rims |
| Quantity | Set of 4 pcs |
| Application | Damage free, easy, fast |
| Suitable for | TyreON T600 - T600C1 - T600C2 - T700S - T700 - T1000 - T2000 |
| Maximum opening jaw | 4 cm |
| Application | Rims aluminium en steel |
| ► | Plastic inlay |
| Weight | 1,5 kg |
| Maximum opening jaw | 4,5 cm |
| Application | Steel rims |
| ► | Large thicker rims |
| Weight | 1,5 kg |
| Delivered free of charge with: | All TyreON truck tire changer models |
| Tubeless roller | Specially for tubeless tyres |
| Rims | Aluminum and steel rims |
| Application | Easy, fast, damage free |
| Suitable for | TyreON T600 - T600C2 - T700S - T700 |
| Tubeless roller | Specially for tubeless tyres |
| Rims | Aluminum and steel rims |
| Application | Easy, fast, damage free |
| Suitable for | TyreON T1000 - T2000 |
| Total Capacity | 22 Ton (4 x 5500 kg) |
| Lift range | 0 - 180 cm |
| ► | Mobile - 400V interconnected wired |
| ► | Wired communication |
| ► | Auto-stop at 30 cm height |
| ► | Operation from any column |
| ► | Each column with LCD touch display |
| ► | Electronic synchronization control |
| Lock button | Descend into locks (every 8 cm) |
| Slowdown button | Slowly descend on axle supports |
| Lifting forks | Distance between is adjustable |
| Synchronous function | Lifting and lowering with with forks at different heights |
| Voltage 1 column | 400V - 2,6 kW electric-hydraulic |
| Transport 1 column | L130 x B115 x H240 cm - 500 kg |
| Transport facility | Pallet truck mechanism + forklift points |
| Combinations | 2, 4, 6,.....12 columns |
| Hydraulic oil | 60 Liter HV-ISO-32 is optional |
| Total Capacity | 22 Ton (4 x 5500 kg) |
| Lift range | 0 - 180 cm |
| ► | Mobile - 400V interconnected wired |
| ► | Wired communication |
| ► | Auto-stop at 30 cm height |
| ► | Operation from any column |
| ► | Main column with LCD display and remote control |
| ► | Electronic synchronization control |
| ► | Cover over pump unit and integrated control panel |
| Lock button | Descend into locks (every 8 cm) |
| Slowdown button | Slow descend on axle supports |
| Lifting forks | Distance between is adjustable |
| Synchronous function | Lifting and lowering with with forks at different heights |
| Voltage 1 column | 400V - 3 kW electric-hydraulic |
| Transport 1 column | L140 x W115 x H225 cm - 575 kg |
| Transport facility | Pallet truck mechanism + forklift points + lifting eye |
| Combinations | 2 ,4 ,6 ..........12 columns |
| Hydraulic oil | 60 Liter HV-ISO-32 is optional |
| Total Capacity | 30 tons (4 x 7500 kg) |
| Lift range | 0 - 180 cm |
| ► | Mobile - 400V interconnected wired |
| ► | Wired communication |
| ► | Auto-Stop at 30 cm height |
| ► | Operation from any column |
| ► | Main column with LCD display and remote control |
| ► | Electronic synchronization control |
| ► | Cover over pump unit and integrated control panel |
| Lock button | Descend into locks (every 8 cm) |
| Slowdown button | Slow descend on axle supports |
| Lifting forks | Distance between is adjustable |
| Synchronous function | Lifting and lowering with with forks at different heights |
| Voltage 1 column | 400V - 3 kW electric-hydraulic |
| Transport 1 column | L140 x W115 x H225 cm - 640 kg |
| Transport facility | Pallet truck mechanism + forklift points + lifting eye |
| Combinations | 2 ,4 ,6 ..........12 columns |
| Hydraulic oil | 60 Liter HV-ISO-32 is optional |
| Total Capacity | 22 Ton (4 x 5500 kg) |
| Lift range | 0-180 cm |
| ► | Mobile - Battery powered |
| ► | Wireless communication |
| ► | Auto-Stop at 30 cm height |
| ► | Operation from any column |
| ► | Each column with LCD touch display |
| ► | Electronic synchronisation |
| ► | Cover over pump unit + integrated control panel |
| Lock button | Descend into locks (every 8 cm) |
| Slowdown button | Slow descend on axle supports |
| Lifting-forks | Distance between is adjustable |
| Synchronous function | Lifting and lowering with with forks at different heights |
| Voltage 1 column | 24V DC 2,2 kW electric-hydraulic |
| Batteries | 2 x Deep Cycle 12V DC 80Ah Gel batteries per column (in series) |
| Quick-charger | In each column a battery charger (230V) |
| Packed 1 column | L130 x W115 x H240 cm - 500 kg |
| Transport facility | Pallet truck mechanism + forklift pockets |
| Combinations | 2, 4, 6, 8 .....16 columns |
| Hydraulic oil | 60 Litres HV-ISO-32 is optional |
| Total Capacity | 33 Ton (6 x 5500 kg) |
| Lift range | 0-180 cm |
| ► | Mobile - Battery powered |
| ► | Wireless communication |
| ► | Auto-Stop at 30 cm height |
| ► | Operation from any column |
| ► | Each column with LCD touch display |
| ► | Electronic synchronisation |
| ► | Cover over pump unit + integrated control panel |
| Lock button | Lock button |
| Slowdown button | Slow descend on axle supports |
| Lifting-forks | Distance between is adjustable |
| Synchronous function | Lifting and lowering with with forks at different heights |
| Voltage 1 column | 24V DC - 2,2 kW electric-hydraulic |
| Batteries | 2 x Deep Cycle 12V DC 80Ah Gel batteries per column (in series) |
| Quick-charger | In each column a battery charger (230V) |
| Packed 1 column | L130 x W115 x H240 cm - 500 kg |
| Transport facility | Pallet truck mechanism + forklift pockets |
| Combinations | 2, 4, 6, 8 .....16 columns |
| Hydraulic oilHydraulic oil | 90 Litres HV-ISO-32 is optional |
| Total Capacity | 30 Ton (4 x 7500 kg) |
| Lift range | 0 - 180 cm |
| ► | Mobile - Battery powered |
| ► | Wireless communication |
| ► | Auto-Stop at 30 cm height |
| ► | Operation from any column |
| ► | Each column with LCD display |
| ► | Electronic synchronisation |
| ► | Cover over pump unit and integrated control panel |
| Lock button | Descend into locks (every 8 cm) |
| Slowdown button | Slow descend on axle supports |
| Lifting-forks | Distance between is adjustable |
| Synchronous function | Lifting and lowering with with forks at different heights |
| Voltage 1 column | 24V DC - 3 kW electric-hydraulic |
| Batteries | 2 x Deep Cycle 12V DC 100Ah Gel batteries per column (in series) |
| Quick-charger | In each column a battery charger (230V) |
| Packed 1 column | L140 x W115 x H225 cm - 680 kg |
| Transport facility | Pallet truck mechanism + forklift pockets + lifting hook |
| Combinations | 2, 4, 6, 8 .....16 columns |
| Hydraulic oil | 60 Liter HV-ISO-32 is optional |
| Total Capacity | 45 Ton (6 x 7500 kg) |
| Lift range | 0 - 180 cm |
| ► | Mobile - Battery powered |
| ► | Wireless ommunication |
| ► | Auto-Stop at 30 cm height |
| ► | Operation from any column |
| ► | Each column with LCD display |
| ► | Electronic synchronisation |
| ► | Cover over pump unit + integrated control panel |
| Lock button | Descend into locks (every 8 cm) |
| Slowdown button | Slow descend on axle supports |
| Lifting-forks | Distance between is adjustable |
| Synchronous function | Lifting and lowering with with forks at different heights |
| Voltage 1 column | 24V DC - 3 kW electric-hydraulic |
| Batteries | 2 x Deep Cycle 12V DC 100Ah Gel batteries per column (in series) |
| Quick-charger | In each column a battery charger (230V) |
| Packed 1 column | L140 x W115 x H225 cm - 680 kg |
| Transport facility | Pallet truck mechanism + forklift pockets + lifting hook |
| Combinations | 2, 4, 6, 8 .....16 columns |
| Hydraulic oil | 90 Liter HV-ISO-32 is optional |
.jpg)
| Total Capacity | 34 Ton (4 x 8500 kg) |
| Lift range | 0 - 185 cm |
| ► | Mobile - Battery powered |
| ► | Wireless communication |
| ► | Auto-Stop at 30 cm height |
| ► | Operation from any column |
| ► | Each column with large LCD color touch display fitted with thick plexiglass (unbreakable and water resistant) |
| ► | Electronic synchronization |
| ► | Cover over pump unit + integrated control panel |
| Lock button | Descend into locks (every 8 cm) |
| Slowdown button | Slow descend on axle supports |
| Lifting-forks | Distance between is adjustable |
| Synchronous function | Lifting and lowering with forks at different heights |
| Voltage 1 column | 24V DC - 3 kW electric-hydraulic |
| Batteries truck column lifts | 2 x Deep Cycle 12V DC 80Ah Gel batteries per column |
| Quick-charger | In each column a battery charger (230V) |
| Transport 1 column | L140 x B120 x H259 cm - 780 kg |
| Transport facility portable truck hoist | Pallet truck mechanism + forklift pockets |
| Combinations mobile column lifts | 2, 4, 6, 8 .....16 columns |
| Hydraulic oil | 60 Liter HV-ISO-32 is optional |
| Total Capacity | 51 Ton (6 x 8500 kg) |
| Lift range | 0 - 185 cm |
| ► | Mobile - Battery powered |
| ► | Wireless communication |
| ► | Auto-Stop at 30 cm height |
| ► | Operation from any column |
| ► | Each column with large LCD color touch display fitted with thick plexiglass (unbreakable and water resistant) |
| ► | Electronic synchronization |
| ► | Cover over pump unit + integrated control panel |
| Lock button | Descend into locks (every 8 cm) |
| Slowdown button | Slow descend on axle supports |
| Lifting-forks | Distance between is adjustable |
| Synchronous function | Lifting and lowering with forks at different heights |
| Voltage 1 column | 24V DC - 3 kW electric-hydraulic |
| Batteries truck column lifts | 2 x Deep Cycle 12V DC 80Ah Gel batteries per column |
| Quick-charger | In each column a battery charger (230V) |
| Transport 1 column | L140 x B120 x H259 cm - 780 kg |
| Transport facility portable truck hoist | Pallet truck mechanism + forklift pockets |
| Combinations mobile column lifts | 2, 4, 6, 8 .....16 columns |
| Hydraulic oil | 90 Liter HV-ISO-32 is optional |
| Total Capacity | 60 Ton (8 x 7500 kg) |
| Lift range | 0 - 180 cm |
| ► | Mobile - Battery powered |
| ► | Wireless ommunication |
| ► | Auto-Stop at 30 cm height |
| ► | Operation from any column |
| ► | Each column with LCD display |
| ► | Electronic synchronisation |
| ► | Cover over pump unit + integrated control panel |
| Lock button | Descend into locks (every 8 cm) |
| Slowdown button | Slow descend on axle supports |
| Lifting-forks | Distance between is adjustable |
| Synchronous function | Lifting and lowering with with forks at different heights |
| Voltage 1 column | 24V DC - 3 kW electric-hydraulic |
| Batteries | 2 x Deep Cycle 12V DC 100Ah Gel batteries per column (in series) |
| Quick-charger | In each column a battery charger (230V) |
| Packed 1 column | L140 x B115 x H225 cm - 680 kg |
| Transport facility | Pallet truck mechanism +,forklift pockets + lifting hook |
| Combinations | 2, 4, 6, 8 .....16 columns |
| Hydraulic oil | 120 Liter HV-ISO-32 is optional |
| Capacity | 80T air hydraulic jack |
| 3-stage jack | 80T - 40T - 20T |
| Lifting height | 21 cm - 62 cm |
| Model | Long chassis - Long bar |
| Weight - Total length | 77 kg - 208 cm |
| Application | Intensive commercial use |
| Delivery includes | Extensions 80 + 40 + 20 mm |
| Hydraulic oil is filled | |
| Capacity | 80T air hydraulic jack |
| 3-stage jack | 80T - 40T - 20T |
| Lifting height | 17,5 cm - 51,5 cm |
| Model | Long chassis - Long bar |
| Weight - Total length | 65 kg - 208 cm |
| Application | Intensive commercial use |
| Delivery includes | Adapters 80 + 40 + 20 mm |
| Hydraulic oil is filled | |
| Capacity | 80T air hydraulic jack |
| 2-stage jack | 80T - 40T |
| Lifting height | 21 - 54,2 cm |
| Model | Long chassis - Long Bar |
| Weight - Total length | 75 kg - 205 cm |
| Application | Intensive commercial use |
| Delivery includes | Extensions 80 - 40 - 20 mm |
| Hydraulic oil is filled | |
| Capacity | 60T airhydraulic jack for trucks |
| 4-stage jack | 60T - 30T - 22T - 11T |
| Lifting height | 15 - 51.3 cm |
| Model | Long chassis - Long bar |
| Weight - Total length | 66 kg - 225 cm |
| Application | Intensive commercial use |
| Delivery includes | Extensions 75 + 45 mm |
| Hydraulic oil is filled | |
| Capacity | 60T airhydraulic jack |
| 1-stage jack | 60T |
| Lifting height | 42 - 105,1 cm |
| Model | Long chassis - Long bar |
| Weight - Total length | 126 kg - 219 cm |
| Application | Intensive commercial use |
| Delivery includes | Extensions 20 - 100 - 200 mm |
| Hydraulic oil is filled | |
| Capacity | 50T pneumatic floor jack |
| 3-stage jack | 50T - 30T - 15T |
| Lifting height | 22 cm - 65,1 cm |
| Model | Long chassis - Long Bar |
| Weight - Total length | 63 kg - 203 cm |
| Application | Intensive commercial use |
| Delivery includes | Extensions 80 + 40 + 20 mm |
| Hydraulic oil is filled | |
| Capacity | 50T Air floor jack |
| 3-stage jack | 50T - 30T - 15T |
| Lifting height | 15 cm - 49,5 cm |
| Model | Long chassis - Long bar |
| Weight - Total length | 53 kg - 208 cm |
| Application | Intensive commercial use |
| Delivery includes | Extensions 110 + 40 + 20 mm |
| Hydraulic oil is filled | |
| Capacity | 50T Pneumatic jack |
| 3-stage jack | 45T - 20T - 10T |
| Lifting height | 12 cm - 35 cm |
| Model | Long chassis - Long bar |
| Weight - Total length | 40 kg - 184 cm |
| Application | Intensive commercial use |
| Delivery includes | Extensions 40 + 40 + 20 mm |
| Hydraulic oil is filled | |
| Capacity | 40T Air-hydraulic |
| 3-stage jack | 40T - 20T - 10T |
| Lifting height | 12.5 - 40.4 cm |
| Model | Long chassis + Long bar |
| Weight - Total length | 44 kg - 212 cm |
| Application | Intensive commercial use |
| Delivery includes | Extensions 75 + 45 mm |
| Hydraulic oil is filled | |
| Capacity | 40T air hydraulic jack |
| 2-stage jack | 40T - 20T |
| Lifting height | 15 - 48 cm |
| Model | Medium chassis - Long Bar |
| Weight - Total length | 43 kg - 187 cm |
| Application | Intensive commercial use |
| Delivery includes | Extensions 110 - 60 - 20 mm |
| Hydraulic oil is filled |
| Capacity | 40T air hydraulic jack |
| 2-stage jack | 40T - 20T |
| Lifting height | 21 - 56,2 cm |
| Model | Medium chassis - Long Bar |
| Weight - Total length | 48 kg - 185 cm |
| Application | Intensive commercial use |
| Delivery includes | Extensions 80 - 40 - 20 mm |
| Hydraulic oil is filled | |
| Capacity | 35T Heavy duty air jack |
| 1-stage jack | 35T |
| Lifting height | 36 cm - 91 cm |
| Model | Long chassis - Long bar |
| Weight - Total length | 86 kg - 201 cm |
| Application | Intensive commercial use |
| Delivery includes | Extensions 50 + 100 + 150 mm |
| Hydraulic oil is filled |
| Capacity | 30T airhydraulic truck jack |
| 2-stage jack | 30T - 15T |
| Lifting height | 15 - 40.9 cm |
| Model | Short chassis - Portable |
| Weight - Total length | 24 kg / 102 - 164,5 cm |
| Application | Intensive commercial use |
| Delivery includes | Extensions 75 + 45 mm |
| Hydraulic oil is filled | |
| Impact wrench | TyreON 3260 Nm |
| Impact wrench | TyreON 2180 Nm |
| Impact wrench | TyreON 1450 Nm |
| Tyres | 12 - 26 Inch |
| Wheels | Ø 104 cm - 38 cm wide |
| Rims | Steel and aluminum |
| Construction | XL Reinforced rear tilting column |
| ► | Heavy duty XL helper arm - pneumatic - 3 functions |
| ► | Mounting head with pneumatic lock |
| ► | Mounting head automatically up and down |
| ► | Leverless mounting head |
| ► | XL double air booster in all 4 claws |
| ► | XL Ø 28 Inch table |
| ► | XL Ø 8 cm cylinders - extra clamping force |
| ► | XL Ø 20 cm cylinder - for 3000 kg BBF |
| ► | Adjustable bead breaker for narrow or wide tyres |
| ► | Blind-foot navigation (bracket between pedals) |
| ► | 2-Speed (7 + 13 rpm) |
| Pumping tyres | High speed - Hands free - Tyre pump |
| Voltage | 400V |
| Tyres | 11 - 24 Inch | 2-Speed |
| Wheels | Ø 100 cm - 35 cm wide |
| Rims | Steel and aluminium |
| Construction | Heavy duty tilting column |
| ► | Heavy duty XL helper arm - pneumatic - 3 functions |
| ► | Mounting head with pneumatic lock |
| ► | XL double air booster in all 4 claws |
| ► | XL Ø 26 Inch table |
| ► | XL Ø 7 cm cylinders - extra clamping force |
| ► | XL Ø 18.6 cm cylinder - 2,800 kg BBF |
| ► | Blind-foot navigation (bracket between pedals) |
| ► | 2 speed 7 + 13 rpm |
| Inflating tyres | High speed - hands free |
| Voltage | 400V |
| In wooden crate | L117 x W128 x H120 cm - 345 kg |
| Tyres | 11 - 24 Inch |
| Wheels | Ø 100 cm - 35 cm wide |
| Rims | Steel and aluminium |
| Construction | Heavy duty tilting column |
| ► | Heavy duty XL helper arm - pneumatic - 3 functions |
| ► | Mounting head with pneumatic lock |
| ► | XL double air booster in all 4 claws |
| ► | XL Ø 26 Inch table |
| ► | XL Ø 7 cm cylinders - extra clamping force |
| ► | XL Ø 18.6 cm cylinder - 2,800 kg BBF |
| ► | Blind-foot navigation (bracket between pedals) |
| ► | 1 speed 7 rpm |
| Inflating tyres | High speed - hands free |
| Voltage | 230V |
| Packed in wooden crate | L117 x W128 x H120 cm - 345 kg |
| Tyres | 12 - 26 Inch |
| Wheels | Ø 104 cm - 38 cm wide |
| Rims | Steel and aluminum |
| Construction | XL Reinforced rear tilting column |
| ► | Mounting head with pneumatic lock |
| ► | XL double air booster in all 4 claws |
| ► | XL Ø 28 Inch table |
| ► | XL Ø 8 cm cylinders - extra clamping force |
| ► | XL Ø 20 cm cylinder - for 3000 kg BBF |
| ► | Adjustable bead breaker for narrow or wide tyres |
| ► | Blind-foot navigation (bracket between pedals) |
| ► | 2-Speed (7 + 13 rpm) |
| Pomp | High speed - Hands free - Tyre pump |
| Voltage | 400V |
| Tyres | 12 - 28 Inch |
| Wheels | Ø 118 cm - 40 cm wide |
| Rims | Steel and aluminium |
| Contruction | Fixed column with swing arm |
| ► | Left helper arm + right helper arm |
| ► | Mounting head with pneumatic lock |
| ► | Right help arm with pneumatic lock to the mounting arm |
| ► | Air booster in all 4 claws |
| ► | Wall placement (column functions as airbooster air tank) |
| ► | XXL Ø 28 Inch table |
| ► | XL Ø 7 cm cylinders - extra clamping force |
| ► | 1 speed 7 rpm |
| Inflating tyres | Digital air filling gun |
| Package | L76 x B98 x H100 cm - 294 kg |
| Voltage | 230V |
| Tyres motorcycle | 6 - 24 Inch | Compact |
| Rims | Steel and aluminium |
| Construction | Fixed column with swing arm for motorcycles |
| ► | Special motorcycle bead breaker |
| ► | Mounting head for motorcycle tyres |
| ► | Raised column for wide tyres |
| ► | Raised clamping jaws - 3 positions |
| ► | XL Ø 18 cm cylinder for 2750 kg BBF |
| ► | XL Ø 8 cm cylinders - extra clamping force |
| Inflating tyres | Airgun |
| Package | L75 x B100 x H102 cm - 215 kg |
| Voltage | 230V |
| Tyres | 11 - 24 Inch |
| Wheels | Ø 96 cm - 30 cm wide |
| Rims | Steel and aluminum |
| Construction | Fixed column with swing arm |
| ► | Pneumatic assist arm with joystick |
| ► | XL Ø 24 Inch table |
| ► | XL Ø 7 cm cylinders - extra clamping force |
| ► | XL bead breaking cylinder - 2.750 kg BBF |
| Inflating tyres | Airgun with pressure gauge |
| Voltage | 230V |
| In wooden crate | L98 x B76 x H95 cm - 207 kg - tyre changer |
| L71 x B62 x H28 cm - 27 kg - assist arm |
| Rim diameter | 10 - 32 Inch |
| Wheels | 75 Kg - Ø 100 cm |
| Balancing modes | Static and dynamic |
| Programs - 11 | Alu 1-2-3-4-5-6-7 Alu* 1-2 Steel 1-2 |
| Auto input | Distance + Diameter + Width |
| ► | 19 Inch LCD Colour 3D Monitor |
| ► | Operation with 3D moving image instruction |
| ► | Automatic measuring cycle, then brakes itself |
| ► | Shaft length 320 mm / Ø 40 mm |
| ► | Motorcycle balancing mode |
| ► | Simple operation, easy self-calibration and self-diagnosis |
| ► | Trouble-shooter with 3D image instruction |
| ► | 25+ spacious top and side storage compartments |
| Packed in crate | L106 x W76 x H111 cm - 175 kg |
| Voltage | 230V |
| Delivery includes | Clamping cones 44 - 132 mm - Quick release wing nut - Calibration weight and more |
| Rim diameter | 10 - 26 Inch + LED lighting |
| Wheels | 75 Kg - Ø 100 cm |
| Balancing modes | Static and dynamic |
| Programs - 7 | Alu 1-2-3-4 Alu* 1 Steel 1-2 |
| Auto input | Distance + Diameter + Width |
| ► | Large dual LED display |
| ► | Automatic measuring cycle, then brakes itself |
| ► | Wheel stops at right position |
| ► | Laser indicates position balancing weight |
| ► | Shaft length 320 mm / Ø 40 mm |
| ► | Motorcycle balancing mode |
| ► | Simple operation, easy self-calibration and self-diagnosis |
| ► | Trouble-shooter with error codes |
| ► | 12 spacious top storage compartments |
| Packed in crate | L100 x W75 x H125 cm - 160 kg |
| Voltage | 230V |
| Delivery includes | Clamping cones 44 - 132 mm - Quick release wing nut - Calibration weight and more |
| Rim diameter | 10 - 26 Inch+ LED lighting |
| Wheels | 75 Kg - Ø 100 cm |
| Balancing modes | Static and dynamic |
| Programs - 7 | Alu 1-2-3-4 Alu*-1 Steel 1-2 |
| Auto input | Distance + Diameter + Width |
| ► | Large dual LED display |
| ► | Automatic measuring cycle, then brakes itself |
| ► | Shaft length 320 mm / Ø 40 mm |
| ► | Motorcycle balancing mode |
| ► | Simple operation, easy self-calibration, and self-diagnosis |
| ► | Trouble-shooter with error codes |
| ► | 12 spacious top storage compartments |
| Packed in crate | L100 x W75 x H125 cm - 160 kg |
| Voltage | 230V |
| Delivery includes | Clamping cones 44 - 132 mm - Quick release wing nut - Calibration weight and more |
| Rim diameter | 10 - 26 Inch+ LED lighting |
| Wheels | 75 Kg - Ø 100 cm |
| Balancing modes | Static and dynamic |
| Programs - 7 | Alu 1-2-3-4 Alu*-1 Steel 1-2 |
| Auto input | Distance + Diameter |
| ► | Large dual LED display |
| ► | Automatic measuring cycle, then brakes itself |
| ► | Shaft length 320 mm / Ø 40 mm |
| ► | Motorcycle balancing mode |
| ► | Simple operation, easy self-calibration and self-diagnosis |
| ► | Trouble-shooter with error codes |
| ► | 12 spacious top storage compartments |
| Packed in crate | L100 x W75 x H125 cm - 160 kg |
| Voltage | 230V |
| Delivery includes | Clamping cones 44 - 132 mm - Quick release wing nut - Calibration weight and more |
| Capacity | 2500 kg |
| Lifting height | 14 - 155 cm |
| ► | Fully pneumatic |
| ► | Fully automatic - mobile |
| ► | Adjustable in width and height |
| ► | For vehicles up to 3200 kg |
| ► | Foldable handle |
| Delivery includes | 2 axle supports - 2000 kg each |
| 20 meter air hose | |
| BMW & Audi adapters | |
| SUV adapters | |
| Wooden box | L136 x B66 x H35 cm - 150 kg |
| Required airpressure | 7 - 9 Bar |
| Capacity | 2700 kg - Mobile |
| Lifting height | 12,5 - 140 cm |
| Drive | 2,2 kW Electric - Hydraulic |
| Type | Fully automatic |
| ► | Electrically unlocked |
| ► | No air required |
| ► | Adjustable lowering speed |
| ► | Parking function (Lock) |
| ► | Automatic lock of lifting arms |
| Including | Lifting pads and height adapters (16) |
| Package | L230 x B107 x H85 cm - 476 kg |
| Promo - For free | Hand pump - lowering if power failure |
| Voltage | 230V |
| Colour | RAL 5015 |
| Capacity | 3000 kg - Mobile |
| Lifting height | 11 - 109 cm |
| Platform length | 140 - 204 cm |
| Drive | 2.2 kW Electric - Hydraulic |
| Type | Fully automatic |
| ► | Mechanically locked every 5 cm |
| ► | Electrically unlocked - direct drop |
| ► | No air required |
| ► | CE Auto-stop at 25 cm |
| ► | Hand pump - also lowering if power failure |
| ► | Broken hose protection |
| Delivery includes | Wheelset + 4 rubber blocks |
| Package | L180 x B155 x H80 cm - 650 kg |
| Promo - For free | Hand pump - lowering if power failure |
| Promo - For free | Wheelset + 8 rubber blocks |
| Voltage | 230V |
.jpg)
| Limited in stock | 25th anniversary edition - graphite gray |
| Capacity | 3000 kg - Mobile |
| Lifting height | 11 - 109 cm |
| Platform length | 140 - 204 cm |
| Drive | 2.2 kW Electric - Hydraulic |
| Type | Fully automatic |
| ► | Mechanically locked every 5 cm |
| ► | Electrically unlocked - direct drop |
| ► | No air required |
| ► | CE Auto-stop at 25 cm |
| ► | Hand pump - also lowering if power failure |
| ► | Broken hose protection |
| Delivery includes | Wheelset + 4 rubber blocks |
| Package | L180 x B155 x H80 cm - 650 kg |
| Promo - For free | Hand pump - lowering if power failure |
| Promo - For free | Wheelset + 8 rubber blocks |
| Voltage | 230V |
| Capacity | 3000 kg - On floor |
| Lifting height | 10,5 - 190,5 cm |
| Platform length | 145 - 205 cm |
| Drive | 2.2 kW Electric - Hydraulic |
| Type | Fully automatic |
| ► | Mechanical safety lock |
| ► | Pressurized air is required |
| ► | Auto-stop at 25 cm + slow descend |
| ► | IR synchronization monitoring |
| ► | Own weight 900 kg |
| ► | Quick and easy to install (video) |
| ► | Broken hose protection |
| Including | Floor bolts |
| A coded hydraulic hose set | |
| Package | L170 x B80 x H150 cm - 995 kg |
| Voltage | 400V or 230V |
| Capacity | 3500 kg - On floor |
| Lifting height | 11,5 - 209 cm |
| Platform length | 147 - 204 cm |
| Drive | 3 kW Electric - Hydraulic |
| Type | Fully automatic |
| ► | hydraulic mechanical safety lock |
| ► | No air - immediate descent |
| ► | Auto-stop at 25 cm + slow descend |
| ► | IR synchronization monitoring |
| ► | Own weight 950 kg |
| ► | Easy to install, automatic venting and platform leveling procedure |
| Including | Floor bolts |
| A coded hydraulic hose set | |
| Package | L205 x B75 x H155 cm - 1000 kg |
| Voltage | 400V or 230V |
| Capacity | 3500 kg - On floor |
| Lifting height | 10,5 - 198 cm |
| Platform length | 148,5 - 210,5 cm |
| Drive | 2.2 kW Electric-hydraulic |
| Type | Fully automatic |
| ► | Hydraulic mechanical safety lock |
| ► | No air - immediate descent |
| ► | Auto-stop at 30 cm + slow descend |
| ► | IR synchronization monitoring |
| ► | Own weight 950 kg |
| ► | Quick and easy to install |
| ► | Broken hose protection |
| Including | Floor bolts |
| A coded hydraulic hose set | |
| Package | L220 x W75 x H85 cm - 1045 kg |
| Voltage | 400V or 230V |
| Capacity | 3000 kg |
| Lifting height | 213 cm (180 net) |
| Drive | 2.2 kW Electric-hydraulic |
| Type | Fully automatic - Heavy duty (800 kg own weight) |
| Platforms | 154 - 180 cm |
| ► | CE Stop + IR synchronization monitoring |
| ► | Parking at any height (lock function) |
| ► | Operation 1 lifting table possible |
| C/w | Mounting anchors + rubber blocks |
| Voltage | 400V or 230V |
| Capacity | 3000 kg |
| Lifting height | 213 cm (180 net) |
| Drive | 2.2 kW Electric-hydraulic |
| Type | Fully automatic - Heavy duty (800 kg own weight) |
| Platforms | 154 - 180 cm extendable at one side |
| ► | CE-Stop + IR synchronization monitoring |
| ► | Parking at any height (lock function) |
| ► | Operation 1 lifting table possible |
| ► | 2 x recessed containers galvanized |
| C/w | Floor bolts + rubber blocks |
| Voltage | 400V or 230V |
| Capacity | 3500 kg |
| Liftheight | 214 cm (180 net) |
| Drive | 3.0 kW Electric - Hydraulic |
| Type | Fully automatic - Heavy duty (900 kg own weight) |
| Platforms | 166 - 206 cm Double extensions |
| ► | CE-Stop + 3 extra safety switches |
| ► | Parking at any height (lock function) |
| C/w | Floor bolts + rubber blocks |
| Voltage | 400V or 230V |
| Capacity | 3500 kg |
| Liftheight | 214 cm (180 net) |
| Drive | 3.0 kW Electric - Hydraulic |
| Type | Fully automatic - Heavy duty (900 kg own weight) |
| Platforms | 166 - 206 cm Double extensions |
| ► | CE-Stop + 3 extra safety switches |
| ► | Parking at any height (lock function) |
| ► | 2 x recessed containers galvanized |
| C/w | Floor bolts + rubber blocks |
| Voltage | 400V or 230V |
| Capacity | 3500 kg - Low Profile |
| Liftheight | 214 cm (180 net) |
| Drive | 3.0 kW Electric - Hydraulic |
| Type | Fully automatic - Heavy duty (900 kg) |
| Platforms | 166 - 206 cm Double extensions |
| ► | CE-Stop + 3 extra safety switches |
| ► | Parking at any height (lock function) |
| ► | Platforms extendable in lowest position |
| ► | Platforms can sink in floor regardless extensions position |
| C/w | Floor bolts + rubber blocks |
| Recessed containers (galvanized) | |
| Voltage | 400V or 230V |
| Capacity | 4000 kg - On floor |
| Liftheight | 216 cm |
| Runway LxW | 480 cm x 60 cm |
| Drive motor | 2,6 kW (16A) |
| 2nd scissor | 4T - H43cm - L150 -- 200 cm |
| ► | LED8P runway lighting |
| ► | Rails for optional rolling jack |
| ► | 1.3 meter ramps |
| ► | Hose sets + floor covers |
| Onfloor height | 29 cm |
| Foundation | C20/25 5.5 x 3 x 2 m |
| Lifting/Lowering | About 70 s |
| Inground-version | Available |
| Voltage | 400V |
| Colour | Anthracite gray / light gray |
| ► | Automatic safety lock - 19 lock positions |
| ► | Pneumatic unlocking of the safety catches, CE-Stop, signal tone when lowering |
| ► | Required air connection 8 - 10 bar |
| ► | Hand pump for lowering in if power failure |
| Hydraulic oil is not included | 20 L TyreON HV-ISO-32 is optional |
| Capacity | 5000 kg - On floor |
| Liftheight | 216 cm |
| Runway LxW | 530 cm x 60 cm |
| Drive motor | 3,5 kW (C16A) |
| 2nd scissor | 4T - H43cm - L150 -- 200 cm |
| ► | LED8P runway lighting |
| ► | Rails for optional rolling jack |
| ► | 1.3 meter ramps |
| ► | Hose sets + floor covers |
| Onfloor height | 31 cm |
| Foundation | C20/25 - 600 x 300 x 20 cm |
| Lifting/Lowering | About 70 s |
| Inground-version | Available |
| Voltage | 400V |
| Colour | Anthracite gray / light gray |
| Hydraulic oil is not included | 20 L TyreON HV-ISO-32 is optional |
| Capaciteit | 5000 kg - On floor |
| Liftheight | 216 cm |
| Runway LxW | 560 cm x 60 cm |
| Drive motor | 3,5 kW (C16A) |
| 2nd Scissor | 4T - H43cm - L150 -- 200 cm |
| ► | PD8 play detector |
| ► | LED8P runway lighting |
| ► | Rails for optional rolling jack |
| ► | 1.3 meter ramps |
| ► | Hose sets + floor covers |
| ► | Pluggable cross connection |
| Onfloor height | 31 cm |
| Foundation | C20/25 - 610 x 300 x 20 cm |
| Lifting/Lowering | About 70 s |
| Inground-version | Available |
| Voltage | 400V |
| Play detector | Complies with the current European and national regulations for play detectors |
| Promo - For free | LPE64 low profile ramp extensions |
| Color | Anthracite gray / light gray |
| Hydraulic oil is not included | 20 L TyreON HV-ISO-32 is optional |
| Capacity | 4000 kg |
| Lifting height | 198 cm (186 cm net) |
| Drive | 2.2 kW Electric-hydraulic |
| Type | Fully automatic - Heavy duty |
| Platforms | 148,5 - 230,5 cm - Double extensions |
| ► | Hydraulic mechanical safety lock |
| ► | Safety and overload valves in the cylinder systems |
| ► | No air required - immediate descent |
| ► | Auto-stop at 25 cm + slow descend |
| ► | IR synchronization monitoring |
| ► | Tip-lever system |
| ► | Scissor axles with bushings, low-wear |
| Delivery incl. | Floor bolts + cover caps + rubber blocks (4) + cylinder protection caps |
| Voltage | 400V |
| Package | L160 x W80 x H42 cm - 900 kg |
| Controller | L48 x W41 x H116 cm - 50 kg |
| Certification | CE / TUV Directive EN1493:2010 Vehicle Lifts |
| Colour | As of 2024, completely anthracite grey RAL7016 |
| 3 models available | |
| TSC4000X2 iXL | Inground - 12 cm |
| TSC4000X2 XLLR | 4 x L100 cm ramps |
| TSC4000X2 XLSR | 4 x L56 cm ramps |
| Capacity | 4000 kg - In floor |
| Liftheight | 216 cm |
| Runway LxW | 480 cm x 60 cm |
| Drive motor | 2,6 kW (16A) |
| 2nd Scissor | 4T - H43cm - L150 -- 200 cm |
| ► | LED8P runway lighting |
| ► | Rails for optional rolling jack |
| ► | Hose sets + floor covers |
| Installation depth | 29 cm |
| Foundation | C20/25 - 550 x 300 x 20 cm |
| Lifting/Lowering | About 70s |
| On Floor version | Available with OFK1 on floor kit |
| Voltage | 400V |
| Color | Anthracite gray / light gray |
| Hydraulic oil is not included | 20 L TyreON HV-ISO-32 is optional |
| Capacity | 5000 kg - In floor |
| Liftheight | 216 cm |
| Runway LxW | 530 cm x 60 cm |
| Drive motor | 3,5 kW (C16A) |
| 2nd Scissor | 4T - H43cm - L150 -- 200 cm |
| ► | LED8P runway lighting |
| ► | Rails for optional rolling jack |
| ► | Hose sets + floor covers |
| Installation depth | 31 cm |
| Foundation | C20/25 - 600 x 300 x 20 cm |
| Lifting/Lowering | About 70 s |
| On floor version | Available with OFK1 on floor kit |
| Voltage | 400V |
| Color | Anthracite gray / light gray |
| Hydraulic oil is not included | 20 L TyreON HV-ISO-32 is optional |
| Capacity | 5000 kg - In floor |
| Liftheight | 216 cm |
| Runway LxW | 560 cm x 60 cm |
| Drive motor | 3,5 kW (C16A) |
| 2nd Scissor | 4T - H43cm - L150 -- 200 cm |
| ► | PD8 play detector |
| ► | LED8P runway lighting |
| ► | Rails for optional rolling jack |
| ► | Hose sets + floor covers |
| ► | Pluggable cross connection |
| Installation depth | 31 cm |
| Fundament | C20/25 - 610 x 300 x 20 cm |
| Lifting/Lowering | About 70 s |
| On Floor-version | Available with OFK1 on floor kit |
| Voltage | 400V |
| Play detector | Complies with the current European and national regulations for play detectors |
| Color | Anthracite gray / light gray |
| Hydraulic oil is not included | 20 L TyreON HV-ISO-32 is optional |
| ►Truck tyre changer 26 Inch | |
| ►Truck wheel balancer with lift | |
.jpg)
| Capacity | 4000 kg |
| Lifting height | 11 - 197,5 cm |
| Vehicle length | Short to Extended |
| Short arms | 3-part : 70 - 131 cm |
| Long arms | 2-part : 90 - 142 cm |
| Application | Intensive Commercial |
| Between columns | 289 cm |
| Construction | 667 kg |
| ► | 2,2 kW Electric hydraulic |
| ► | All-in-one 24V control unit |
| ► | 2 parking (lock) positions |
| C/w | 2-stage lifting pads |
| 4 x adapter 7 cm | |
| Voltage | 400V or 230V |
| Foundation | 20 cm thick reinforced concrete C25/20 |
| Certification | CE / TÜV standard EN1493:2010 |
| Package | L294 x W46 x H100 cm - 717 kg |
| Capacity | 4000 kg - No threshold |
| Lifting height | 11 - 197,5 cm |
| Vehicle length | Short to Extended |
| Short arms | 3-part : 70 - 131 cm |
| Long arms | 2-part : 90 - 142 cm |
| Application | Intensive commercial |
| Between / height columns | 289 / 375 cm |
| Construction | 716 kg |
| ► | 2,2 kW Electric hydraulic |
| ► | All-in-one 24V control unit |
| ► | Lock-function / 2 parking positions |
| C/w | 2-stage lifting pads |
| 4 adapters 7 cm | |
| Voltage | 400V or 230V |
| Foundation | 20 cm thick reinforced concrete C25/20 |
| Certification | CE / TÜV standard EN1493:2010 |
| Package | L295 x W45 x H110 cm - 766 kg |
| Capacity | 4000 kg - No threshold |
| Lifting height | 11 - 197,5 cm |
| Vehicle length | Short to Multiple extended |
| Short arms | 3-part : 57 - 112 cm |
| Long arms | 2-part : 92 - 151,5 cm |
| Application | Heavy duty commercial |
| Between / height columns | 256 / 390,6 cm |
| Construction | 766 kg |
| ► | 3,0 kW Electric hydraulic |
| ► | All-in-one 24V control unit |
| ► | Parking (lock) position every 7 cm |
| C/w | 2-stage lifting pads |
| 4 x adapters 7 cm | |
| Voltage | 400V |
| Foundation | 20 cm thick reinforced concrete C25/20 |
| Certification | CE / TÜV standard EN1493:2010 |
| Package | L294 x W73 x H55 cm - 816 kg |
| Capacity | 4500 kg |
| Lifting height | 9,5 - 204,5 cm |
| Vehicle length | Very short to Multiple extended |
| Short arms | 3-part : 64,5 - 129,6 cm |
| Long arms | 3-part : 79,5 - 162,7 cm |
| Application | Heavy Duty Commercial |
| Construction | 811 kg |
| Between columns | 280 cm |
| ► | 3,0 kW Electric hydraulic |
| ► | All-in-one 24V control unit |
| ► | Parking (lock) position every 7 cm |
| ► | Low noise |
| C/w | 2-stage lifting pads (4) |
| Voltage | 400V |
| Promo - For free | Adapters 4 x 3,5 cm + 4 x 8 cm (HA8-2) |
| Promo - For free | Hand pump - lowering if power failure |
| Foundation | 20 cm thick reinforced concrete C25/20 |
| Certification | CE / TÜV standard EN1493:2010 |
| Package | L287 x W85 x H50 cm - 861 kg |
.jpg)
| Capacity | 5000 kg - fully automatic |
| Lifting height | 11,6 - 195,5 cm |
| Vehicle length | Very short to Multiple extended |
| Arms front | 3-part : 82 - 170 cm |
| Arms back | 3-part : 82 - 170 cm |
| Application | Heavy duty professional |
| Construction | 1075 kg |
| Between columns | 320 cm |
| ► | 2.6 kW Electric hydraulic |
| ► | All-in-one 24V control unit |
| ► | Parking (lock) position every 5 cm |
| ► | Obstacle protection (slack cable) |
| ► | Low noise |
| ► | Vehicle width up to 283.8 cm |
| ► | Direct lowering(The lift does not first raise a bit) |
| C/w | 2-stage lifting pads |
| Optional | 6T base reinforcement kit (BFK6) |
| Voltage | 400V |
| Promo - For Free | Adapters 4 x 8 cm + 4 x 15,5 cm (HA8) |
| Promo - For Free | Hand pump - lowering if power failure |
| Foundation | 20 cm thick reinforced concrete C25/20 |
| Certification | CE / TÜV standard EN1493:2010 |
| Packaging | L290 x W55 x H95 cm - 1075 kg |
| Controller | L45 x W27 x H27 cm - 10 kg |
| Powerunit | L83 x W30 x H30 cm - 25 kg |
| ►2 columns 5T, vehicle width 283,8 cm | |
| ►6T base reinforcement kit | |
| Capacity | 2500 kg |
| Lifting height | 10 - 200 cm |
| ► | Mobile |
| ► | Electrical release - immediate descent |
| ► | 35 cm auto-stop (CE) |
| ► | Parking function |
| ► | Hand pump - also lowering if power failure |
| Short arms | Telescopic and 120º to swing |
| Long arms | Telescopic and 90º to swing |
| Comes with | 4 height adapaters |
| Package | L190 x B130 x H100 cm - 600 kg |
| Column | L255 x B80 x H55cm - 250 kg |
| Promo - For free | Hand pump - lowering if power failure |
| Voltage | 230V |
| Capacity | 3500 kg |
| Lifting height | 11 - 200 cm |
| ► | Mobile |
| ► | Electrical release - immediate descent |
| ► | 35 cm auto-stop (CE) |
| ► | Parking function |
| ► | Extendable loading platform |
| ► | Hand pump - also lowering if power failure |
| Short arms | 2 x telescopic |
| Long arms | Telescopic + to swing |
| Comes with | 4 height adapaters |
| Package | L248 x B116 x H72 cm - 1300 kg |
| Promo - For free | Hand pump - lowering if power failure |
| Voltage | 400V or 230V |
| Capacity | 300 kg |
| Lifting height | 18 - 120 cm |
| Table LxW | 180 x 57 cm |
| Drive | 0.75 kW Electric-hydraulic |
| Type | Fully automatic, pneumatically unlocked |
| ► | Air required |
| ► | Powerunit under the table |
| ► | Moving ramp |
| ► | Pneumatic wheel clamp (foot operated) |
| ► | Rear wheel panel 20 cm wide |
| Comes with | Hydraulic oil + wheel clamp |
| Packed | L192 x B70 x H70 cm - 275 kg |
| Voltage | 230V |
.jpg)
| Capacity | 3500 kg |
| Lifting height | 11 - 200 cm |
| ► | Fixed / mounted on floor |
| ► | Electrical release - immediate descent |
| ► | 35 cm auto-stop (CE) |
| ► | Parking function |
| ► | Extendable loading platform |
| ► | Hand pump - also lowering if power failure |
| Short arms | 2 x telescopic |
| Long arms | Telescopic + to swing |
| Delivery includes | 4 height adapaters |
| Package | L248 x B116 x H72 cm - 1300 kg |
| Promo - For free | Hand pump - lowering if power failure |
| Voltage | 400V |
.JPG)
| Capacity | 500 kg |
| Lifting height | 20 - 120 cm |
| Table LxW | 248 x 71,5 |
| Drive | 0.75 kW Electric-hydraulic |
| Type | Fully automatic, pneumatically unlocked |
| ► | Air required |
| ► | Power unit under the table |
| ► | Moving ramp |
| ► | Pneumatic wheel clamp (foot operated) |
| ► | Rear wheel panel 35 cm wide |
| Comes with | Hydraulic oil + wheel clamp |
| Packed | L250 x B80 x H35 cm - 330 kg |
| Power unit | L62 x B47 x H41 cm - 20 kg |
| Voltage | 230V |
| Capacity | 700 kg |
| Lifting height | 16 - 120 cm |
| Table LxW | 222 (250) x 73 cm |
| Drive | 1.5 kW Electric-hydraulic |
| Up + down | 2 buttons on controller |
| Unlocking | By foot |
| ► | No air required |
| ► | Extendable ramp |
| ► | Rear wheel panel W=48 cm |
| Voltage | 230V |
| Capacity | 700 kg |
| Lifting height | 16 - 120 cm |
| Table LxW | 222 (250) x 73 cm |
| Drive | 1.5 kW Electric-hydraulic |
| Up + down | 2 buttons on controller |
| Unlocking | By foot |
| ► | No air required |
| ► | Extendable ramp |
| ► | Rearwheel panel W=48 cm |
| Voltage | 230V |
.jpg)
| Capacity | 700 kg |
| Lifting height | 16 - 120 cm |
| Table LxW | 222 x 100 cm |
| Drive | 1.5 kW electric-hydraulic |
| Type | Automatic - unlock by footpedal |
| ► | No air required |
| ► | Roll-off protection 1 meter wide |
| ► | Front wheel panel 48 cm wide |
| ► | Thermally protected |
| ► | Pressure relief valve |
| Packed | L225 x B75 x H145 cm - 350 kg |
| Voltage | 230V |
.jpg)
| Capacity | 700 kg |
| Lifting height | 16 - 120 cm |
| Table LxW | 222 x 130 cm |
| Drive | 1.5 kW electric-hydraulic |
| Type | Automatic - unlock by footpedal |
| ► | No air required |
| ► | Ramp in the rear wheel panel |
| ► | Rear wheel panel 48 cm wide |
| ► | Thermally protected |
| ► | Pressure relief valve |
| Packed | L225 x B75 x H145 cm - 350 kg |
| Voltage | 230V |
| Rim diameter | 10 - 24 Inch |
| Wheels | 65 kg - Ø 100 cm |
| Shaft | 14 mm |
| Balancing modes | Static and dynamic |
| Programs | Steel and aluminium |
| Display | Double LED |
| ► | Specially for motorcycle tires |
| Package | L97 x B76 x H120 cm - 150 kg |
| Voltage | 230V |
| ►Truck tyre changer 26 Inch | |
| ►Truck jack 50T - 3 Stages |
| ►T700S Truck tyre changer including chuck extensions - 56 Inch |
| Capacity | 65 kg - car wheels |
| Lifting height | 16,2 - 48,6 cm |
| Pneumatic connection | 8 - 10 Bar |
| Weight | 43 kg |
| ► | C/w air suspension and carriage |
| Packaging | L170 x B62 x H95 cm - 45 kg |
| ►Motorcycle tyre changer | |
| ►Motorcycle lifting table | |
| ►Motorcycle wheel balancer |
| ►Motorcycle tyre changer | |
| ►Motorcycle wheel balancer | |
| Capacity | 4000 kg - flat runways |
| Lifting height | 22 - 193 cm |
| Runway length | 4,56 meters |
| ► | Obstacle protection (slack cable) |
| ► | Mechanical safety lock |
| ► | Automatic unlock (air) |
| ► | Pressure relief valve |
| ► | Adjustable runways |
| ► | Wide - larger commercial vehicles etc. |
| Packaging | L475 x B55 x H150 cm - 1750 kg |
| Jack - optional | L94 x B57 x H27 cm - 115 kg |
| LED6 - optional | 6 stuks L116 x B2,3 x H2,8 cm |
| Voltage | 400V |
| Drive | 2.2 kW Electric - Hydraulic |
| Foundation | 200 mm |
| Distance | Runways 90 -100 cm adjsutable |
| Controller | Raise, unlock and lower |
| Capacity sliding air jack | 2500 kg - mobile |
| Operation | Air-Hydraulic |
| Equipped with | Rolling chassis |
| Range - lifting arms | 685 - 1625 mm |
| Range - chassis | 830 - 1120 mm |
| Lifting height / adapters turned up | 205 - 570mm / 625mm |
| Air connection | 8 - 10 bar |
| Including | Air-hydraulic pump / airhose / adapters |
| Packaging | L94 x W57 x H27 cm - 115 kg |
| Suitable for | Scissorlifts / 4 columns lifts (TyreON) |
| ►4 column lift 4T | |
| ►Rolling air jack - 3000 kg | |
| ►LED6 - Runway lighting x 6 |
| Capacity | 4200 kg - flat runways |
| Lifting height | 13 - 180 cm |
| Runways | 480 cm long - 51,2 cm wide |
| ► | Obstacle protection (slack cable) |
| ► | Mechanical safety lock |
| ► | Automatic unlock (air) - immediate descend |
| ► | Pressure relief valve |
| ► | Short ramps of 99,6 cm |
| ► | Hand pump for lowering in case of power failure |
| ► | 285 cm between posts, for commercials and campers |
| Drive | 2,6 kW electric-hydraulic |
| Foundation | 200 mm |
| Packaging | L520 x W75 x H125 cm - 2200 kg |
| Voltage | 400V |
| Distance | Runways 89 -105 cm adjsutable |
| Controller | Raise, unlock and lower |
| Capacity | 4200 kg - alignment |
| Lifting height | 13 - 185 cm |
| Runways | 480 cm lang - 52,4 cm breed |
| Alignment | Wheelbase 180 - 360 cm |
| ► | Obstacle protection (slack cable) |
| ► | Mechanical safety lock |
| ► | Automatic unlock (air) - immediate descend |
| ► | Pressure relief valve |
| ► | Rear wheel alignment plates + runway shims |
| ► | 3D alignment and other types of alignment equipment |
| ► | Short ramps of 99,6 cm |
| ► | Hand pump for lowering in case of power failure |
| ► | 285 cm between posts, for commercials and campers |
| Drive | 2,6 kW electric-hydraulic |
| Foundation | 200 mm |
| Packaging | L520 x W75 x H125 cm - 2500 kg |
| Voltage | 400V |
| Distance | Runways 89 -105 cm adjsutable |
| Controller | Raise, unlock and lower |
| Capacity | 5500 kg - flat runways |
| Lifting height | 21 - 196 cm |
| Runways | 560 cm long - 65 cm wide |
| 2de scissor | 3.2T - extendable platforms |
| ► | Obstacle protection (slack cable) |
| ► | Mechanical safety lock |
| ► | Automatic unlock (air) - immediate descend |
| ► | Pressure relief valve |
| ► | Short ramps of 99,5 cm |
| ► | Hand pump for lowering in case of power failure |
| ► | 309 cm between posts, for trucks, campers, etc. |
| ► | Quick lift unit - raise / lower 45 s |
| Drive | 4.0 kW electric-hydraulic |
| Foundation | 200 mm |
| Packaging | L570 x W75 x H125 cm - 2350 kg |
| Voltage | 400V |
| Distance | Runways 92 -101 cm adjustable |
| Controller | Raise, unlock and lower |
| Capacity | 5500 kg - alignment |
| Lifting height | 27,5 - 205 cm |
| Runways | 560 cm long - 65 cm wide |
| Alignment | 170 - 420 cm wheelbase |
| 2de scissor | 3.2T - extendable platforms |
| ► | Obstacle protection (slack cable) |
| ► | Mechanical safety lock |
| ► | Automatic unlock (air) - immediate descend |
| ► | Pressure relief valve |
| ► | Rear wheel alignment plates + runway shims |
| ► | 3D alignment and other types of alignment equipment |
| ► | Short ramps of 99,5 cm |
| ► | Hand pump for lowering in case of power failure |
| ► | 309 cm between posts, for trucks, campers, etc. |
| ► | Quick lift unit - raise / lower 45 s |
| Drive | 4.0 kW electric-hydraulic |
| Foundation | 200 mm |
| Packaging | L570 x W75 x H125 cm - 2850 kg |
| Voltage | 400V |
| Distance | Runways 92 -101 cm adjustable |
| Controller | Raise, unlock and lower |
| New ! | Pneumatic locking of the rear wheel alignment plates by switch on the controller |
| Capacity | 6400 kg - Alignment |
| Lifting height | 23,5 - 195 cm |
| Runway length | 521,5 cm |
| ► | Obstacle protection (slack cable) |
| ► | Mechanical safety lock |
| ► | Automatic unlock (air) - immediate descend |
| ► | Pressure relief valve |
| ► | Rear wheel alignment plates + runway shims |
| ► | 3D alignment and other types of alignment equipment |
| ► | Extra wide, also suitable for trucks, campers etc. |
| Alignment | 190 - 380 cm wheelbase |
| Drive | 3.0 kW Electric - Hydraulic |
| Package | L540 x B60 x H125 cm - 2300 kg |
| Voltage | 400V |
| Distance | Runways 90 - 100 - 110 cm adjustable |
| Controller | Raise, unlock and lower |
| ►Alignment lift - 6400 kg - Runways 521,5 cm | |
| ►Rolling air jack - 3200 kg | |
| ►Runway lighting 24V LED | |
| Capacity | 6400 kg - alignment |
| Lifting height | 23,5 - 195 cm |
| Runway length | 581,5 cm |
| ► | Obstacle protection (slack cable) |
| ► | Mechanical safety lock |
| ► | Automatic unlock (air) - immediate descend |
| ► | Pressure relief valve |
| ► | Rear wheel alignment plates + runway shims |
| ► | 3D alignment and other types of alignment equipment |
| ► | Extra wide, also suitable for trucks, campers etc. |
| ► | Extra wide, also extended company cars, light trucks, agricultural vehicles, motorhomes |
| Alignment | 190 - 420 cm wheelbase |
| Drive | 3.0 kW Electric - Hydraulic |
| Package | L540 x B60 x H125 cm - 2400 kg |
| Voltage | 400V |
| Distance | Runways 90 - 100 - 110 cm adjustable |
| Controller | Raise, unlock and lower |
| Capacity wheel alignment lift | 5000 kg - On floor |
| Liftheight | 214 cm |
| Runway LxW | 520 cm x 76 cm |
| Drive motor | 4 kW |
| 2nd scissor | 3.5T - H45cm - L160 -- 220 cm |
| ► | LED8P runway lighting |
| ► | Rails for optional rolling jack |
| ► | 1.16 m ramps |
| ► | Hose set + floor covers |
| Onfloor height | 22 cm |
| Foundation | C20/25 - 570 x 300 x 20 cm |
| Lifting/Lowering | About 40 s |
| Inground-version | Not available |
| Shipment | Worldwide (except NL - DE - BE) |
| Voltage | 400V |
| Hydraulic oil is not included | 20 L TyreON HV-ISO-32 is optional |
| Capacity sliding air jack | 3000 kg - mobile |
| Operation | Air Hydraulic |
| Equipped with | Rolling chassis |
| Range - lifting arms | 805 - 1325 mm |
| Range - chassis | 876 - 976 mm |
| Lifting height / adapters turned up | 245 - 595 mm / 703 mm |
| Airconnection | 8 - 10 bar |
| Inclusive | Air-hydraulic pump / airhose / adapters |
| Packing | L94 x W57 x H27 cm - 115 kg |
| Suitable for | TyreON TPL4000 4 columns carlift |
| Capacity rolling air jack | 3200 kg - mobile |
| Operation | Air-Hydraulic |
| Equipped with | Rolling chassis |
| Range - lifting arms | 915 - 1471 mm |
| Range - chassis | 1066 - 1158 mm |
| Lifting height / adapters turned up | 205 - 570 mm / 625 mm |
| Air connection | 8 - 10 bar |
| Including | Air-hydraulic pump / airhose / adapters |
| Packaging | L94 x W57 x H27 cm - 115 kg |
| Suitable for | 4 columns lifts (TyreON) |
| TyreON TWA 3D PLUS | 3D Wheel alignment machine |
| ► | With more than 60.000 vehicle data |
| ► | HD 6 million pixel automatically moving cameras |
| ► | Storage system on both sides for the targets |
| ► | Camera support for vehicle entry |
| ► | 10” tot 26” self-centring clamps |
| ► | Aluminium rims clamped damage-free without extras |
| ► | Lightweight, shockproof targets with very high resolution |
| ► | Also functional under sunlight - UV-permeable targets |
| ► | Light filter with sensor - adjusts to workshop lighting |
| Columns height | 2.918 mm |
| Total width | 2.878 mm |
| Camera height | 500 - 2.560 mm |
| Software platform | Windows |
| Colour monitor | 1 x 32 Inch - LCD |
| Placement | Floor fixed or mobile with optional mobile kit |
| Manual | Available in 5 languages English, Italian, French, German, Spanish |
| Italian software | Available in 34 languages |
| Database vehicle data | Supplied on CD-ROM - no subscription required |
| Voltage / power | 230V (500 Watt) |
| Packed | L300 x l100 x H90 cm - 350 kg |
| ►Alignment lift - 6400 kg - Runways 581,5 cm | |
| ►Rolling air jack - 3200 kg | |
| ►Runway lighting 24V LED | |
| Capacity | 50 Ton |
| Cilinder stroke | 20 cm |
| Bed dimensions | 25 x 71 cm |
| Bed height | 100 cm adjustable |
| Airpressure | 7.5 ~ 8.5 Bar |
| Airconnection | 1/4'' NPT |
| Package | L201 x B117 x H45 cm - 338 kg |
| Dimensions | L 85 cm x B 53 cm x H 5,5 cm |
| Packed - 4 pieces | L120 x B80 x H30 - cm / 100 kg (euro pallet) |
| Delivery includes | Set of floor fixing anchors (8) |
| Motorcycle front tires all sizes | 6 - 21 cm wide |
| Motorcycles | up tot 700 kg |
| Required air pressure | 8 Bar |
| ► | Clamps and locks fully automatically - handsfree |
| ► | Additional mechanical locking via rotary knob |
| Suitable for | TyreON TSC600 (pre-drilled holes), the TyreON ASM0703H and all other brands of motorcycle lifts |
| Capacity | 75 Ton |
| Cilinder stroke | 25 cm |
| Bed dimensions | 29 x 80 cm |
| Bed height | 95 cm adjustable |
| Airpressure | 7.5 ~ 8.5 Bar |
| Airconnection | 1/4'' NPT |
| Package | L137 x W85 x H212 cm - 502kg |
| ►Motorcycle wheel balancer with professional motorcycle wheel adapter |
.jpg)
| Length | 160 cm |
| ► | Set of 2 pieces |
| ► | Rubber pads / platform protection |
| ► | Height adjustable Liftingpads |
| 2 x 105-165 mm / 2 x 135-210 mm | |
| Weight | 50 kg |
| Packaging | L160 x W80 x H50 cm - 65 kg on a pallet |
| Capacity autolift - lift from the side | Cars up to 3000 kg |
| Height | 110 cm |
| ► | Mobile |
| ► | For vehicles up to approx. 3000 kg |
| ► | Air hydraulic - Foot operated |
| ► | Mechanically locked in 5 positions |
| Product dimensions - weight | L97 x B71 x H131 cm - 99 kg |
| Delivery includes | Clip-on wheelfork |
| Clip-on sill adapter | |
| Filled with hydraulic oil | |
| Colour | Bleu RAL5017 |
| Required airpressure | 8 - 10 Bar |
| Packaging | L122 x B76 x H35 cm - 115 kg |
| Pump pressure | 350 bar |
| Capacity | 80 kg |
| Lifting height - wheelhub | 155 cm |
| Lifting range | 0 - 130 cm |
| Lifting speeds | 2 |
| Battery capacity | 400 times up and down |
| Operation | 24V Electric-mechanical |
| Weight | 72 kg |
| ► | Mobile |
| ► | Cordless |
| ► | Battery 24V - 20 Ah |
| Comes with | 230V battery charger |
| Packed in wooden box | L180 x B50 x H35 cm - 75 kg |
| Voltage | 24V-TL80R |
| Voltage | 230V-Battery charger |
| Chuck extensions | 56 Inch |
| Set / Application | 4 pieces / Heavy duty |
| Suitable for | TyreON T700S - T700 |
| Shaft | Ø 40 mm |
| Adapater | 4 x 275 / 4 x 285 mm |
| Adapater | 5 x 225 / 5 x 286 / 5 x 325 mm |
| Adapater | Disc 280(mm |
| Suitable for | TyreON TB120 / TB200 / Balancers with 40 mm shaft |
| Shaft | Ø40 or Ø36 mm |
| Rims | for 3, 4 and 5 hole rims without axle hole |
| Inclusive | 36 mm adapter |
| Suitable for | TyreON CTB125 / CTB3D / TB200 / Wheel balancers with 40 of 36 mm shaft |
| Shaft | Ø40 mm |
| Rims 4 holes | Stitch size 4 x 108 |
| Fixed stitch | For example Peugeot |
| Provided with | Centering hub |
| Geschikt voor | TyreON CTB125 / CTB3D / TB200 / Wheel balancers with 40 mm shaft |
| Capacity | 7500 kg - 1 axle support |
| Height | 85 - 135 cm - adjustable |
| ► | Mobile undercarriage - 3 suspended castors wheels with locks |
| ► | Handgrips on adjustable support with integrated coil spring |
| Weight | 45 kg |
| Shaft | Ø40 mm |
| 1 cone | Ø95 up to 175 mm |
| 1 flange | Ø225 mm |
| Suitable for | TyreON CTB125 / CTB3D / TB200 / TB120 / Wheel balancers with 40 mm shaft |
| Shaft | Ø40 mm |
| Clamping shaft | Ø14 mm |
| Application | Static and dynamic balancing |
| Clamping arms | With spring mechanism |
| Accessories | Extensive set of filling bushes + cones up to Ø30 mm |
| Suitable for | TyreON CTB125 / CTB3D / TB200 / Wheel balancers with 40 mm shaft |
| Capacity | 4000 kg |
| Lifting height | 10,8 - 198 cm |
| Drive | 2.2 kW Electric-hydraulic |
| Type | Fully automatic - Heavy duty |
| Platforms | 148,5 - 230,5 cm - Double extensions |
| ► | Hydraulic mechanical safety lock |
| ► | Safety and overload valves in the cylinder systems |
| ► | No air required - immediate descent |
| ► | Auto-stop at 25 cm + slow descend |
| ► | IR synchronization monitoring |
| ► | Tip-lever system |
| ► | Axles with bearing bushes |
| Delivery incl. | 4 x 56,2 long ramps |
| Floor bolts + floor gutters + rubber blocks (4) + cylinder protection caps | |
| Voltage | 400V |
| Package | L160 x W80 x H42 cm - 900 kg |
| Controller | L48 x W41 x H116 cm - 50 kg |
| Certification | CE / TUV Directive EN1493:2010 Vehicle Lifts |
| Colour | As of 2024, completely anthracite grey RAL7016 |
| 3 models available | |
| TSC4000X2 XLSR | 10.8 cm drive-on height - 56 cm long ramps |
| TSC4000X2 XLLR | 5 cm drive-on height - 100 cm long ramps |
| TSC4000X2 iXL | 0 cm drive-on height - Flush-mounted in the floor (12 cm) |
.jpg)
| Capacity | 4000 kg |
| Lifting height | 5 - 198 cm |
| Drive | 2.2 kW Electric-hydraulic |
| Type | Fully automatic - Heavy duty |
| Platforms | 148,5 - 230,5 cm - Double extensions |
| ► | Hydraulic mechanical safety lock |
| ► | Safety and overload valves in the cylinder systems |
| ► | No air required - immediate descent |
| ► | Auto-stop at 25 cm + slow descend |
| ► | IR synchronization monitoring |
| ► | Tip-lever system |
| ► | Axles with bearing bushes |
| Delivery incl. | 4 x 100 cm long ramps voor 5 cm ground clearance |
| Floor bolts + floor gutters + rubber blocks (4) + cylinder protection caps | |
| Voltage | 400V |
| Package | L160 x W80 x H42 cm - 900 kg |
| Controller | L48 x W41 x H116 cm - 50 kg |
| Certification | CE / TUV Directive EN1493:2010 Vehicle Lifts |
| Colour | As of 2024, completely anthracite grey RAL7016 |
| 3 models available | |
| TSC4000X2 XLLR | 5 cm drive-on height - 100 cm long ramps |
| TSC4000X2 XLSR | 10.8 cm drive-on height - 56 cm long ramps |
| TSC4000X2 iXL | 0 cm drive-on height - Flush-mounted in the floor (12 cm) |
| Drive Square | 1 Inch |
| Breakaway torque | 3260 Nm / 2400 ft lbs |
| Anvil | 20 cm - 8 Inch |
| No-load speed | 3600 rpm |
| Drive Square | 1 Inch |
| Breakaway torque | 2180 Nm / 1600 ft lbs |
| Anvil | 20 cm - 8 Inch |
| No-load speed | 4200 rpm |
| Capacity | 8500 kg - 1 axle support |
| Height | 137 - 197 cm - adjustable |
| ► | Handgrips on mobile base with 2 wheels |
| ► | Handgrips on adjustable support with integrated coil spring |
| Weight | 85 kg |
| Capacity | 7500 kg - 1 axle support |
| Height | 134,5 - 189,5 cm - adjustable |
| ► | Mobile undercarriage - 3 suspended castors wheels with locks |
| ► | Handgrips on adjustable support with integrated coil spring |
| Weight | 70 kg |
| ►Truck tyre changer 56 Inch | |
| ►Truck jack 60T - 4 Stages |
| ►Truck tyre changer 26 Inch, compact, 2-Speed, 3000 kg BBF | |
| ►Truck jack 40T - 3 Stages |
| Adapters for | Aluminum + steel motorcycle rims |
| Quantity | Set - 4 pcs |
| Mounting | On car tyre changers |
| ► | Adjustable- 2 positions |
| Suitable for | TyreON TC25, TC24AH(S), T26AH, T26XL and all other brands tyre changers |
| ►Truck tyre changer 42 Inch | |
| ►Truck - Bus - Car wheel balancer with lift | |
| Mounting arm | For (dis)mounting of tyres on passenger car rims |
| Quantity | Set of 5 pcs |
| Application | Damage-free, easy mounting and dismounting of car tyres |
| Suitable for | TyreON T650M2(W) |
| ►13- 26 Inch mobile tyre changer for truck tires, super singles, passenger car tires | |
| ►Aluminium clamping jaws truckrims - Set of 4 | |
| ►Mounting arm passenger cars tyres - Set of 5 | |
| ►Truck tyre changer 56 Inch | |
| ►Protection rings for ALU truck rims | |
| ►Tubeless truck tyre mounting head | |
| ►Truck tyre changer 42 Inch | |
| ►Truck jack 35T - 1 Stage | |
| ALU clamping jaws | For alumium truck rims |
| Quantity | Set of 4 pcs |
| Application | Damage free, easy, fast |
| ► High quality aluminum alloy | Very heavy duty and long lasting |
| Suitable for | TyreON T650M2 - T650M - T600C3 |
| ►Truck tyre changer 56 Inch | |
| ►Wheel dolly XL - 1500 kg | |
| Capacity EV battery lift | 1200 kg - also maneuvering with load |
| Lifting height | 57 - 192 cm |
| Own weight | 370 kg |
| Engine power | 0.75 kW electric-hydraulic |
| Table length | 130 - 140 cm extendable |
| Table width | 77 cm |
| Total length | 194 cm including handle |
| Total width | 85 cm including castors |
| Type | Fully automatic - extremely high stability |
| ► | Lifting and lowering with wired remote control |
| ► | Short turning circle - 4 solid rubber wheels, 2 swivel wheels with brake |
| ► | 104 threaded holes in the table top (M10) |
| ► | Precise adjustment of the table in height, width and length directions |
| ► | The table is adjustable in length and width by +/- 10 degrees |
| ► | Insulated table top, for working on electric cars |
| ► | The 2-part table top is extendable by 11 cm |
| ► | Hydromechanically locked and unlocked |
| ► | No compressed air required - immediate descent |
| ► | Acoustic and optical signal during lowering |
| Noise level | =<75 dB |
| Colour mobile lifting table | Anthracite grey RAL 7016 |
| Voltage | 230V / 1Ph (Connection value 10 Amp) |
| Packaging | L175 x B90 x H75 cm - 375 kg |
| ►Truck tyre changer 52 Inch | |
| ►Wheel dolly - 1500 kg | |
| ►Alignment scissor lift 4T - In floor - Runways 4.8 m | |
| ►Air hydraulic rollling jack - 2.5T |
| ►Alignment scissor lift 4T - On floor - Runways 4.8 m | |
| ►Air hydraulic rollling jack - 2.5T | |
| ►Ramp extensions - 64 cm | |
.jpg)
| Turn plates | Frontwheelalignment |
| Quantity | Set of 2 pieces - height 4 cm |
| Dimensions | L45 x B45 x H4 cm - 22,5 kg (per unit) |
| Movable plate | Ø 35,5 cm |
| ► | Movable in all directions and rotatable |
| ► | Heavy professional version |
| ► | Double lock |
| ► | With bearings |
| ► | Two handles |
| Packed | L50 x B50 x H7 cm - 46 kg |
| Suitable for | TyreON TPL6400(XL)A - TPL4200A |
| Base reinforcement | Set of 2 plates - Capacity 6T |
| Dimension 1 plate | L120 x B20 cm - 17.5 kg |
| Suitable for | TyreON TL50E PRO |
| 2 plates packed | L20 x B20 x H10 cm - 35 kg |
| Including | 12 fixing anchors - 15 cm (16M20) |
| Limited in stock | 25th anniversary edition - graphite grey |
| Capacity | 2500 kg |
| Lifting height | 10 - 200 cm |
| ► | Mobile |
| ► | Electrical release - immediate descent |
| ► | 35 cm auto-stop (CE) |
| ► | Parking function |
| ► | Hand pump - also lowering if power failure |
| Short arms | Telescopic + 120º to swing |
| Long arms | Telescopic + 90º to swing |
| Comes with | 4 height adapters |
| Package | L190 x W130 x H100 cm - 600 kg |
| Column | L255 x W80 x H55cm - 250 kg |
| Promo - For free | Hand pump - lowering if power failure |
| Voltage | 230V |
.jpg)
| Clamping rings | For aluminium / alloy truck rims |
| Quantity | Set - 4 of pcs |
| Application | Heavy duty, damage free, sustainable |
| Diameters (mm) | Ø 280 - Ø 220 - Ø 201 - Ø 175 |
| Siutable for | Truck tyrechangers |
| Clamping ring | For aluminium / alloy truck rims |
| 1 piece | Diameter Ø 175 mm |
| Application | Damage free, heavy duty |
| Siutable for | Truck tyrechangers |
| ►Alignment scissor lift 5T - In floor - Runways 530 cm | |
| ►Air hydraulic rollling jack 2.5T |
| Clamping ring | For aluminium / alloy truck rims |
| 1 piece | Diameter Ø 201 mm |
| Application | Damage free, heavy duty |
| Siutable for | Truck tyrechangers |
| Clamping ring | For aluminium / alloy truck rims |
| 1 piece | Diameter Ø 220 mm |
| Application | Damage free, heavy duty |
| Suitable for | Truck tyrechangers |
| Clamping ring | For aluminium / alloy truck rims |
| 1 piece | Diameter Ø 201 mm |
| Application | Damage free, heavy duty |
| Suitable for | Truck tyrechangers |
| ►Alignment scissor lift 5T - On floor - Runways 530 cm | |
| ►Air hydraulic rollling jack 2.5T | |
| ►Ramp extensions - 64 cm |
| ►Truck tyre changer 56 Inch | |
| ►Truck - Bus - Car wheel balancer with lift | |
.jpg)
| Capacity | 25T |
| Lifting height | 170 cm |
| Operation | Electric-hydraulic |
| Platform length | 900 cm |
| Platform width | 75 cm |
| Engine power | 7.5 kW / 400V-3Ph |
| Application | Trucks / Heavy vehicles |
| Recessed version | Installation depth 42 cm |
| On Floor version | Ramps 37 cm high |
| Equipped with | ►Roll-off protection |
| ►Independent mechanical safety locks | |
| CE/TÜV/EC-Type | ► EN 1493:2010 |
| ► EN ISO 12100:2010 | |
| ► EN 60202-1:2018 |
| ►Truck tyre changer 56 Inch | |
| ►Press 50T air-hydraulic |
| Capacity | 2700 kg - fully automatic |
| Lifting height | 217 cm |
| Free height | 205 cm below the lifting platform |
| Platform length | 418 cm (incl. ramp of 38 cm) |
| Platform width / / Total width | 220 cm / 265,7 cm |
| Voltage | 230V/1Ph |
| Motor power | 2,2 kW - C16A fuse |
| ► | Safe 24V operation |
| ► | Electric release of safety locks - no air required |
| ► | Fully closed galvanized steel platform |
| ► | Hydraulic overload valve |
| ► | Infrared photo sensor |
| ► | 2 hydraulic cylinders |
| ► | Vehicle roll-off protection (rear) |
| ► | Acoustic + optical lowering signal |
| ► | Multiple parking lifts can be linked, on both sides |
| Weight | 1150 kg |
| Color RAL7016 (grey) + RAL2004 (orange) | |
| ► | 2 columns + 1 lifting platform |
| Hydraulic oil not included | 20 liters hv-iso-32 is optional |
| Package | L380 x W80 x H115 - 1200 KG |
| Set - 2 pcs | Width - 5,15 m (3 columns) |
| Set - 3 pcs | Width - 7,64 m (4 columns) |
| Set - 4 pcs | Width - 10,13 m (5 columns) |
| ►Car tyre changer 230V - 2 helper arms - Airbooster | |
| ►Wheel balancer Auto Distance + Diameter input | |
| Complete set | 2 test plates, controller with inspection lamp, hydraulic pump unit, hose set, electrical control box |
| Static load | 7.5T |
| Axle load | 2600 kg maximum |
| Track width | 100 to 200 cm |
| Platform size | L50 x W27 x H5,2 cm |
| Test movements | Length, width, parallel and in opposite directions (diagonal) |
| Number of test movements | 8 |
| Movement width | 80 mm in both directions |
| Movement length | 50 mm in both directions |
| Movement speed | 50 mm / sec. |
| Movement force | 8 kN |
| Finishing | Checker plate, galvanized |
| Hydraulic oil | 6L |
| Inground version | Available |
| Surface mounted version | Available with 4 ramps |
| Version incl. runway extensions | Available 60x60x5,6 (cm) including PD8 play detector) |
| Connection | 400V / 1.1 kW (16 Amps) |
| ►Truck tyre changer 42 Inch | |
| ►Press 50T air-hydraulic | |
| ►Mobile car scissor lift - 3T - blue / lightgray | |
| ►Ramp set (4) - blue | |
| ►Truck tyre changer 42 Inch | |
| ►Wheel dolly XL - 1500 kg | |
.jpg)
| Capacity | 1000 kg |
| Runway width | 35 cm |
| Access / lifting height | 6,5 - 187 cm |
| Runway length | 185 cm (202 cm with ramps) |
| Track width | from 55 up to 180 cm |
| Dimensions | L270 x B190 x H283 cm - 480 kg |
| ► | Fixed / mounted on floor |
| ► | Automatic locking - electric unlocking |
| ► | 35 cm auto-stop + signaling (CE) |
| ► | Parking function |
| Lifting / lowering | Approx. 20 seconds |
| Engine | 2,2 kW hydraulic power unit |
| Voltage | 230V/C16A / 400V3PH/C16A |
| Packaging | L291 x W53 x H71 cm - 500 kg |
 (2).jpg)
| Turn plates | Front wheel alignment |
| Quantity | Set of 2 pieces - height 5 cm |
| Dimensions | L45 x B45 x H5 cm - 23 kg (per unit) |
| Movable plate | Ø 35,5 cm |
| ► | Movable in all directions and rotatable |
| ► | Heavy professional version |
| ► | Double lock |
| ► | With bearings |
| ► | Two handles |
| Packed | L50 x B50 x H8 cm - 47 kg |
| Suitable for | TyreON TSC4000X2A - TSC5000X2A - TPL5500A |
| Capacity 4 pieces | 34000 kg - 4 axle supports |
| Height | 137 - 197 cm - adjustable |
| Packed 4 pieces in 1 box | L150 x W100 x H100 cm - 350 kg |
| Crossbeam capacity | 14T |
| Length x width | 375 x 84,4 cm |
| ► | Mobile - 4 heavy duty suspended swivel castors |
| Inclusive | 8 piece adapter set |
| Weight | 385 kg |
| Packaging | L390 x W90 x H60 cm - 400 kg |
| Set of attachable wheel forks | 2 pieces |
| Packaging | 17 kg |
| Suitable for | TyreON TL10E |
.jpg)
| Capacity | 2 x 2700 kg |
| Lifting height | 217 cm |
| ► | 3 columns + 2 lifting platforms |
| Required length | 5149 mm |
| Hydraulic oil not included | 40 liters hv-iso-32 is optional |
.jpg)
| Capacity | 3 x 2700 kg |
| Lifting height | 217 cm |
| ► | 4 columns + 3 lifting platforms |
| Required length | 7641 mm |
| Hydraulic oil not included | 60 liters hv-iso-32 is optional |
.jpg)
| Capacity | 4 x 2700 kg |
| Lifting height | 217 cm |
| ► | 5 columns + 4 lifting platforms |
| Required length | 10133 mm |
| Hydraulic oil not included | 80 liters hv-iso-32 is optional |
.jpg)
| Capacity | 4000 kg - fully automatic |
| Lifting height | 12 - 197 cm |
| Vehicle length | Short to extended |
| Short arms | 2-part: 84,5 - 130,5 cm |
| Long arms | 3-part: 69 - 132,5 cm |
| Application | Intensive professional use |
| Construction | 680 kg |
| Between columns | 279 cm |
| ► | 2,2 kW Electric hydraulic |
| ► | All-in-one 24V control unit |
| ► | Parking function / Lock function |
| ► | Stable construction frame for base (for poor or thin concrete or uneven) |
| ► | Low noise |
| C/w | Height-adjustable lifting pads (4) |
| Voltage | 400V of 230V |
| Foundation | 15 cm thick reinforced concrete C25/20 |
| Certification | CE / TÜV directive EN1493:2010 |
| Packaging | L300 x W55 x H120 cm - 700 kg |
| Capacity EV battery lift | 1500 kg - 2 hydraulic cylinders |
| Lifting height | 64 - 202 cm |
| Own weight | 550 kg |
| Engine power | 1,1 kW electric-hydraulic |
| Table length | 180 - 213 cm cm extendable |
| Table width | 80 cm |
| Total length | 208 cm - including handle |
| Total width | 106 cm - including castors |
| Type | Fully automatic - extremely high stability |
| ► | Lifting and lowering with wired remote control |
| ► | Short turning circle - 4 solid rubber wheels, 2 swivel wheels with brake |
| ► | 136 threaded holes in the table top (M10) |
| ► | Precise adjustment of the table in height, width and length directions |
| ► | The table is adjustable in length and width by +/- 6 degrees |
| ► | Insulated table top, for working on electric cars |
| ► | The 2-part table top is extendable by 33 cm |
| ► | Mechanically locked, electrically unlocked |
| ► | No compressed air required - immediate descent |
| ► | Acoustic and optical signal during lowering |
| Noise level | =<75 dB |
| Colour mobile lifting table | Anthracite grey RAL 7016 |
| Voltage | 230V / 1Ph (Connection value 12 Amp) |
| Packaging | L195 x B110 x H85 cm - 550 kg |
.jpg)
| Motor - power | 3 kW - 4 hp |
| Capacity max. / effective | 539 / 415 Liters per minute |
| Air tank | 200 L |
| Pressure | 8 - 10 Bar |
| Aftercooler | ✓ |
| Cylinders | 2 |
| Stages | 1 |
| Dimension | L142 x W57 x H100 - cm |
| Weight | 120 kg |
| Voltage | 400 V |
| Adapter set | 8-piece - 20 cm high |
| 4 x with mounting rubber | 10 cm height adjustable |
| 4 x with threaded | 10 cm height adjustable |
| M10 bolts x 8 | For mounting on the lifting table |
| Suitable for | TyreON TSC1200E / 1500E |
| Packaging | L46 x W31 x H28 cm - 24 kg |
| ►Alignment lift - 4200 kg - Runways 480 cm | |
| ►Rolling air jack - 2500 kg | |
| ►Runway lighting 24V LED |
| ►Tyre changer, 230V, helparm + Airbooster | |
| ►Wheel balancer Auto Distance + Diameter input | |
| ►2 Post lift 4T, Fully automatic - 230V or 400V | |
| ►4 post lift - 4200 kg - Runways 480 cm | |
| ►Rolling air jack - 2500 kg | |
| ►Runway lighting 24V LED | |
| Capacity | 6000 kg - fully automatic |
| Lifting height | 12 - 197 cm |
| Vehicle length | Very short to multi-extended |
| Arms front | 3-part: 98 - 180 cm |
| Arms back | 3-part: 98 - 180 cm |
| Application | Intensive professional use |
| Construction | 1100 kg |
| Between columns | 282,5cm |
| ► | 3.0 kW Electric hydraulic |
| ► | All-in-one 24V control unit |
| ► | Parking function / Lock function |
| ► | Base reinforcement kit (2) |
| ► | Low noise |
| C/w | 2-stage lifting pads |
| Voltage | 400V |
| Foundation | 20 cm thick reinforced concrete C25/20 |
| Certification | CE / TÜV directive EN1493:2010 |
| Packaging | L305 x W55 x H125 cm - 1150 kg |
| Capacity | 4000 kg |
| Drive-up height | 12,5 cm |
| Lifting height | 188 cm |
| Free height | 180 cm - below the platform |
| Runways | L = 415 cm / W = 47.5 cm |
| Height of posts | 219 cm |
| Width - between posts | 240 cm |
| Width - outside posts | 267 cm |
| Width - with controller + pump unit | 287,4 cm |
| Required length | Approx. 450 cm without separate ramps |
| Surface | Hardened, thickness 10 cm - C20/25 |
| Lifting / lowering time | 45 / 30 sec. |
| Motor power | 2,2 kW - C16A fused (230V) |
| Extra safe | The loading platform can only be lowered if a lever is first turned to release the safety hooks |
| ► | Industrial (alu) motor with cooling fins and fan |
| ► | Automatic car rear side roll-off protection - 2 hinged short ramps |
| ► | Car frontside roll-off |
| ► | Hydraulic overload valve |
| ► | Hydraulic lifting cylinder under the runway |
| ► | Cable break protection - mechanical locks in each column, every 10 cm |
| ► | Foot protection brackets on the sides of the runways |
| ► | Safe 24V controller with up and down buttons |
| ► | Height limit switch |
| ► | Mechanical synchronization control with steel cables |
| ► | Diamond profile on runways and ramps |
| Delivery included | 2 seperate ramps, 2 hinged ramps, 2 stop plates, 4 wheel chocks and 3 plastic collection trays |
| Colour - powder coating | RAL 7016 anthracite grey |
| Voltage | 230V |
| Packaging 4 post parking lift | L420 x W54 x H95 cm - 850 kg |
| Hydraulic oil is not included | 10 L HV-ISO-32 is optional |
| Capacity | 4000 kg |
| Drive-up height | 12,5 cm |
| Lifting height | 188 cm |
| Free height | 180 cm - below the platform |
| Runways | L = 415 cm / W = 47.5 cm |
| Height of the posts | 219 cm |
| Width | 460 cm - between the posts |
| Width | 267 cm - outside posts |
| Width | 486,4 cm - with controller + pump unit |
| Required length | Approx. 450 cm without the separate ramps |
| Surface | Hardened, 10 cm - C20/25 |
| Lifting / lowering time | 50 / 30 sec. |
| Motor power | 2,2 kW - C16A fused (230V) |
| Extra safe | The loading platform can only be lowered if a lever is first turned to release the safety hooks |
| ► | Industrial (alu) motor with cooling fins and fan |
| ► | Automatic car rear side roll-off protection - 4 hinged short ramps |
| ► | Car fontside roll-off protection - 4 stop plates |
| ► | Hydraulic overload valve |
| ► | Hydraulic lifting cylinder under the runway |
| ► | Cable break protection - mechanical locks in each column, every 10 cm |
| ► | Foot protection brackets on the sides of the runways |
| ► | Safe 24V controller with up and down buttons |
| ► | Height limit switch |
| ► | Mechanical synchronization control with steel cables |
| ► | Diamond profile on runways and ramps |
| Delivery includes | 4 separate ramps, 4 hinged ramps, 4 stop plates, 8 wheel chocks and 3 plastic collection trays |
| Colour - powder coating | RAL 7016 anthracite grey |
| Voltage | 230V |
| Packaging 4 post parking lift | L465 x B54 x H165 cm - 1400 kg |
| Hydraulic oil is not included | 10 L HV-ISO-32 is optional |
| ► | Parking lift 4T + wheel kit |
| ► | 3 plastic drip trays |
| ► | Steel platform jack or tools |
| ► | Parklift 4.2 T + 4 piece wheelkit |
| ► | 6 oil drip trays |
| ► | 2 platforms for jack/tools |
| ►Tyre changer with assist arm 230V | |
| ►Wheel balancer Auto Distance + Diameter input |
| ►Truck tyre changer 60 Inch ► 80T 3-stage jack | |
| ►Leverless tyer changer, 2-speed + assist arm + airbooster | |
| ►Wheel balancer Truck Bus car with wheel lift |
| ►230V Mobile lifting table 1200 kg 230V | |
| ►8-piece adapterset set - height adjustable |
| ►230V Mobile lifting table 1500 kg 230V | |
| ►8-piece adapterset set - height adjustable | |
| 1 column lift 1000kg | |
| Adapters (2) - vehicles with different track widths |
| ►Truck tyre changer 26 Inch, compact, 2-Speed, 3000 kg BBF | |
| ►Truck jack 50T - 3 Stages |
| ►Alignment scissor lift 5T - In floor - Runways 5.6 m with Playing detector | |
| ►Air hydraulic rollling jack - 2.5T |
| ►Tyrechanger, 2-Speed, Helparm, Airbooster, 400V | |
| ►Wheelbalancer Auto Distance + Diameter + Width |
| ►Truck tyre changer 56 Inch | |
| ►Truck jack 80T - 2 Stages |
| Power 3 Phase | Prime 11,3 kVA - Standby 12,5 kVA (16,6A) |
| Voltage | 400 / 230 V |
| Engine | VANGUARD 2 cylinder type 3564 |
| Cooling system | Aircooled |
| Starting system | Electric + manual start |
| Fuel / Tank | Petrol / 45 L |
| Dimensions | L79 x W58 x H76,5 cm - 127 kg |
| Sockets | 400V 32A |
| 230V 16A | |
| Standard features | Overload protection |
| Oil pressure sensor | |
| Silencer with exhaust adapter | |
| Battery | |
| Hourmeter | |
| Standard with | Exhaust hose extension |
| Wheel kit - 2 wheels + handle | |
| Service kit - air filter, spark plug, engine oil | |
| Noise level Lwa | 96 dB(A) |
| Generatorset | 12,5 kVA - Electric start |
| Air compressor | 10 Bar |
| Hose reel | 20 m |
| Inflation gun | 12 Bar |
| Smart Control | 2 x 400V |
| Suitable for | TyreON T650M - T650M2 |
 (1).jpg)
| ►T650M 11- 26 Inch Mobile tyre changer with wireless controller | |
| ►12,5 kVA Genertorset / E-Start / Smart control | |
| ►Air compressor 10 Bar / Hose reel / Inflation gun | |
.jpg)
| ►Truck tyre changer 56 Inch | |
| ►Truck jack 60T - 4 Stages | |
| ►Press 50T air-hydraulic | |
| Parking width XL | 2492 mm - also SUVs, commercial vehicles and wide sports cars |
| P1 - capacity | 2500 kg |
| P2 - capacity | 2000 kg |
| Height under platforms | 2100 mm (variable) |
| Max. lifting height | 4470 mm |
| Column height | 4966 mm |
| Minimum height space | Min. 5970 mm (including 1500 mm high car on P2) |
| Platform length | 4549 / 5060 mm including ramp |
| Ramp height | 150 mm |
| Descend P1 / P2 | 20 / 40 sec. |
| Connection voltage | 400V-3PH / 3.0 kW / 16A (C) (one electrical connection point) |
| ► | Platforms fit together perfectly |
| ► | Mechanical lock in each column, every 10 cm |
| ► | Automatic electric unlocking |
| ► | Cable break protection |
| ► | Slack cable protection |
| ► | Hydraulic overload valve |
| ► | Mechanical synchronization control with steel cables |
| ► | 24V key-switch controller |
| ► | Height limit switches for P1 and P2 |
| ► | Lock- / parking function every 10 cm |
| ► | One hydraulic cylinder under P1 for lifting and lowering |
| ► | Adjustable height under platforms |
| ► | Platform P2 locked with 4 hooks (fixed height position at 4470 mm) |
| Delivery includes | 2 sets of galvanized sheet steel insert plates (between lanes) |
| 2 fixed ramps | |
| 4 stop plates (roll-off protection) | |
| 16 floor anchors (M16) | |
| Hydraulic oil | 15 Liter hv-iso-32 is optional |
| Packaging car stacker | L4950 x W75 x H107 cm - 2000 kg |
| L120 x W80 x H50 cm - 150 kg (pallet) | |
| Color car stacker lift | Anthracite gray RAL 7016 (color of ramps may differ) |
| Position pump unit and key-switch controller | On the left column at the driveway side / on the right column at the rear |
| ►Alignment scissor lift 5T - On floor - Runways 5.6 m with Playing detector | |
| ►Air hydraulic rollling jack - 2.5T |
| XL wide, long and high | Also SUVs, commercial vehicles and wide sports cars |
| Capacity | 3600 kg - fully automatic |
| Drive-up height | 12 cm |
| Lifting height | 222 cm |
| Free height | 210 cm - under the platform |
| Runways | L = 480 cm / W = 48,2 cm |
| Height of posts | 252,6 cm |
| Width | 231,4 cm - between posts |
| Width | 254 cm -outside posts |
| Required length | About 560 cm ramps included |
| Surface | Hardened, thickness 10 cm - C20/25 |
| Lifting / lowering time | 45 / 30 sec. |
| Motor power | 2.2 kW - C16A fuse (230V) |
| ► | Safe 24V controller with key switch and dead man's control |
| ► | For indoor and outdoor use ( (IP65) |
| ► | Protective cover over the controller against rain |
| ► | 6 solid steel plates between the runways (removable) |
| ► | Anti-slip diamond profile ramps and the entire platform |
| ► | Automatic mechanical locking in each column, every 10 cm |
| ► | Automatic electric unlocking |
| ► | Front car roll-off protection - 2 stop plates |
| ► | Runway side-exit-protection - 2 wing plates over the entire length |
| ► | One hydraulic cylinder under the platform for lifting and lowering |
| ► | Mechanical synchronization control with steel cables |
| ► | Hydraulic pump with non-return valve and overload valve |
| ► | Mechanical obstacle and cable break protection |
| ► | Parking at any height |
| ► | Lock function, lower platform into locks |
| ► | Height limit switch |
| ► | Industrial (alu) motor with cooling fins and fan |
| ► | No compressed air required |
| ► | Double powder coating - electrostatically applied |
| Delivery includes | Set of floor anchors |
| Colour 4 post parking lift | RAL 7016 Anthracite grey + orange |
| Voltage | 230V/1Ph |
| Packaging parking lift 4 columns | L485 x W50 x H95 cm - 950 kg |
| Hydraulic oil | 10 Liter hv-iso-32 is optional |
| Position of pump unit and controller | On the right post at driveway side / on the left post at the rear side |
| Dimensions | L 85 cm x B 53 cm x H 5,5 cm |
| Packed - 4 pieces | L120 x B80 x H30 - cm / 100 kg (euro pallet) |
| Delivery includes | Set of floor fixing anchors (8) |
| ►Mobile car scissor lift - 3 T - fully gray | |
| ►Ramp set (4) - gray |
| ►Leverless tyre changer helparm + Airbooster | |
| ►Balancer, 19 Inch LCD 3D monitor, Auto input Distance + Diameter + Width |
| ►Truck tyre changer 26 Inch, compact, 2-Speed, 3000 kg BBF | |
| ►Aluminium clamping jaws for ALU truck rims (4) | |
| ►Truck tyre changer 42 Inch | |
| ► Aluminium clamping jaws for ALU truck rims (4) | |
| ►Leverless tyre changer helparm + Airbooster | |
| ►Balancer, 19 Inch LCD 3D monitor, Auto input Distance + Diameter + Width | |
| ►Motorcycle tyre changer |
| ►Tyrechanger, 2-Speed, Helparm, Airbooster, 400V | |
| ►Balancer, 19 Inch LCD 3D monitor, Auto input Distance + Diameter + Width |
| ►Tyre changer, 230V, helparm, Airbooster | |
| ►Balancer, 19 Inch LCD 3D monitor, Auto input Distance + Diameter + Width |
| ►26 Inch XL tyre changer, tilting column, 2-speed, airbooster | |
| ►Wheelbalancer Auto Distance + Diameter + Width |
