- Light commercial vehicles
- Vans and SUV
- Passenger cars
- Classic cars
€ 1.500,- excl. VAT
|Maximum lifting height||1000||mm|
|Minimum lifting height||105||mm|
|Time lifting / lowering||15 / 10||sec||(with 1500 kg)|
|Total length scissorlift||1944||mm||(incl. ramps)|
|Length scissorlift||1400||mm||(excl. ramps)|
|Width lift tables||530||mm|
|Space between the platform||700||mm|
|Drive on height||105||mm|
|Type||Electrisch - Hydraulisch|
|Required air pressure||4 - 8||Bar|
|Voltage (single phase)||230||Volt|
|Low noise||<= 70||dB|
|Weight (approx.)||585||kg||(excl. control panel)|
|Required surface area||1944 x 1760||mm||Length x Width|
This wheelset is developed especially for the TyreON TSC3000. The wheelset consists of two separate wheels and a jack with a wheel.
You can manually, without using tools, simply place the two wheels. Then lower the mid rise lift, so the lift will be placed automatically on wheels. Then you can put the control unit on the lift tables.
You place the jack and you can easily move the scissor lift. The large wheels makes it possible to roll the bridge with ease on less flatter surfaces.
After the removal of the wheels, the bridge is ready for use again.