|Lifting height||16 - 120 cm|
|Table width||73 cm|
|Drive||0.75 kW Electric-hydraulic|
|Type||Automatic + foot-pedal to unlock|
|►||No air required|
|►||Wheel clamp is optional (air)|
|►||Rear wheel panel 31 cm wide|
|Comes with||Bikejack and hydraulic oil|
|Packed||L223 x B74 x H26 cm - 285 kg|
|Powerunit||L97 x B92 x H45 cm - 50 kg|
TyreON TSC700 - Without motor clamp Euro 1.250, = excl. VAT
The TyreON TSC700 comes standard without clamp.
If you do have no air compressor, this is a good choice because you'll need 230 Volt power supply only.
A wheel stopper that can be mounted at the end of the table is included as standard.
TyreON TSC700PN - With motor clamp Euro 1.400, = excl. VAT
Choose the pneumatic clamp to experience the convenience of the powerful automatic clamp.
In addition to a power supply of 230 volts, you also need a small air compressor.
A wheel stopper that can be mounted on the end of the motorbikelift table is included as standard.
|Length of the table||222||cm|
|Width of the table||73||cm|
|Size of the rear drop panel (L x W)||53,5 x 31||cm|
|Length of the ramp||72||cm|
|Duration lifting / lowering||20 / 10 minimum||sec.|
|Adjustable lifting power / lowering speed||✓ / ✓|
|Mechanical safety lock||✓|
|Unlocking the saftely lock||foot pedal|
|Height protection (auto-stop)||✓|
|Wheelclamp||pneumatic or without|
|Operation lifting table||with hand held remote control|
|Operation wheel clamp||push button on the clamp / manual|
|Type of ramp||slides under the table|
|Number of foldable panels||1|
|Number of removable panels||1|
|Position hydraulic pomp-unit||inside mobile unit|
|On-floor / In-floor||on-floor or in-floor|
|Air connection for pneumatic tools||-|
|Anti-slip profile on ramp / on table||✓ / ✓|
|Slots for tie down support||✓|
|Standard supplied with motor jack||✓|
|Standard supplied with wheel stopper||✓|
|Voltage / Phase / Frequency||230 / 1 / 50||Volt / phase(s) / Hz|
|Power electric engine||0.75||kW|
|Circuit protection (fuse)||10||Ampère|
|Required air pressure (air compressor)||6 - 8 / not needed||bar|
|Weight of the motorbike lift||275||kg|
|Required floorspace||225 x 75||cm (excl. ramp of 72 cm)|
For placement on the work floor without constructional interventions. You can fix the motorbike lift table to the floor with anchors.
You will save time with the easy installation and every user can now experience the choice of the professional.
A multifunctional motorbikejack is supplied as standard.
The TyreON TSC700 Motorbike lift table is tested for all functions in our factory before it is packed with;
or, the TyreON TSC700PN with;