+31 (0)72 - 54 01 002

TPH30T-2M Air hydraulic jack 30 Tons - Minimum height 15 cm - portable (24 kg)

Capacity 30T airhydraulic truck jack
2-stage jack 30T - 15T
Lifting height 15 - 40.9 cm
Model Short chassis - Portable
Weight - Total length 24 kg / 102 - 164,5 cm
Application Intensive commercial use
Comes with Extensions 75 + 45 mm
Hydraulic oil is filled
Portable air hydraulic jack for the safe lifting of trucks, trailers, commercial vehicles, buses, forklift trucks and construction equipment.

Ideal to keep in your own vehicle. It can easily be carried and used at any location. The handle can be collapsed and acts as a carrying arm.

With a minimum height of 15 cm, practically any jacking point can be reached. With a maximum jacking height of almost 41 cm, it can also be used for vehicles with high axles.

TyreON TPH30T-2M portable air hydraulic jack 30 ton

The lifting power of the pistons is rated 30T at half height and 15T at full extension, which is truly impressive.
This hydraulic portable jack requires compressed air to lift loads up to 30 Tonne.
TyreON jacks are easy to operate and are featured with divers safety options as dead man’s joystick which also aids controlled lowering speed.

Portable air hydraulic jack - features - quality

  • Compact, short chassis, rubber wheels and an extendable handle
  • Functional design and powder coated
  • Minimum height 15 cm and narrow profile of 18 cm
  • The handle doubles as a carrying arm
  • Operated with reliable hold-to-run joystick
  • Shortcut for (dis)connecting the air hose
  • The jack can be moved, manoeuvred, raised and dropped using the handle
  • A foot pedal allows you alter the handle position
  • The handle locks into 4 positions: 45º - 90º - 180º and the carrying position
  • The handle can be extended from 67.5 to 130 cm
  • 164.5 cm reach, long bar and with rubber hand grips
  • Optimum stability with wide base
  • The chassis of 4.5 mm steel plate provides protection of the internal parts
  • In- and externally hard-chromed cylinders prevent wear and corrosion
  • Each cylinder is fitted with two seals to prevent oil loss
  • Fast lifting by means of pneumatic high-pressure pump
  • Screw top for topping up hydraulic fluid
  • 2 extensions to close gap between the saddle of the jack and the jacking point

Portable air hydraulic jack for frequent commercial use

Heavy duty

The robust, durable and portable jacks from TyreON are made for frequent commercial use.
With their solid construction and use of heavy-duty steel plate, the jack is able to withstand knocks.
The jacks have a long working life due to quality checks during production, technical specifications and the use of the best materials.

Dead man's safety feature
To ensure safety, the portable jack immediately turns off if you let go of the joystick.

Most demanding conditions
The portable truck jack can be used both inside and outside in the most demanding conditions, and can also be used safely on ground that is not completely flat or on a slight incline.
Metal expands and contracts with variations in temperatures. TyreON portable truck jacks will not fail in extremely low or high temperatures.

Factory-tested - Quality Centre
The Quality Centre carries out stringent quality control checks on the jack during every stage of the manufacturing process. The portable air hydraulic jack is tested under load from -25° C to + 45° C and is also subjected to static and dynamic off-centre load tests to guarantee safe operation.

CE-certified to comply with current regulations, including:
EN 12100:2010 Safety of Machinery + EN 1494:2000+A1: 2008 Mobile or Movable Jacks

Functionality – Portable air hydraulic jack 30 ton

Overpressure valve
Overpressure valve to prevent damage due to overload.

Fast lift to jacking point
The TyreON TPH30T-2M is fitted with a system that allows the lifting cylinders to be raised to the jacking point quickly and then also to be dropped rapidly once without load.

Locked position and lift evenly
The non-return valves guarantee a locked position for loads at any height and a controlled even high lift rate under load.

Equalized descent
A reduction valve ensures equalized and smooth descent, even under heavy load.

Oil circulation
As the hose, cylinder and oil reservoir are interlinked, the oil circulates and cannot be released, even if the jack is positioned on its side.

The techniques and possibilities of the TyreON TP30T-2M Portable air hydraulic jack


TyreON Draagbare lucht hydraulische garagekrik 30T


Technical information TPH30T-2M

Portable air hydraulic jack 30 ton

Maximum capacity  30 Tonne      
Minimum height 150 mm    
Lifting height / with extensions 289 / 409 mm    
Stage 1    30T 73 mm    
Stage 2    15T 66 mm    
Total stroke 139 mm    
Width of the base - profile 180 mm    
Width including wheels 280 mm    
Chassis length 510 mm    
Length of the bar - extension attached 675 - 1300 mm    
Total length of the truck jack - extension attached 1020 - 1645 mm    
Required air pressure 9-12  (0.9-1.2) Bar  (Mpa)    
Air consumption 300         Litre/minute    
Shortcut DIN Euro coupling 1/4" screw thread  
Packed - 25 kg L70 x B30 x H28 cm    

In stock
The price is excluding tax and delivery costs

Included in your order

  • TPH30T-2M portable air hydraulic jack with wheels and handle
  • 60 cm extension piece for handle
  • Hydraulic oil (Pre-filled with hv-iso-32)
  • 75 mm and 45 mm extensions
  • User's manual

Guarantee and TyreCARE - Final testing

Every portable air hydraulic jack is fully tested by us before being packed along with its documentation, ready for transport!
TyreON air hydraulic jacks come with a one-year guarantee.
TyreCare, Even after the warranty period, we will be at your disposal with advice and technical support if

Various models in stock


► 30T  2 stage - min. 15 cm - short chassis - portable
TyreON TPH30T-2M portable air hydraulic jack 30 ton >>

► 30T  2 stage - min. 15 cm - short chassis 
TyreON TPH30T-2 hydraulic axle jack on air 30 ton >>

► 40T  2 stage - min. 17.5 cm - short chassis 
TyreON TPH40T-2 pneumatic servicejack 40 ton >>

► 40T  3 stage - min. 12.5 cm - long chassis 
TyreON TPH40T-3 air operated hydraulic jack 40 ton >>

► 60T  3 stage - min. 15 cm - long chassis
TyreON TPH60T-3 air hydraulic floor jack 60 ton >>

► 60T  4 stage - min. 15 cm - long chassis 
TyreON TPH60T-4 pneumatic hydraulic jack 60 ton >>

► 60T  1 stage - min. 42 cm - long chassis - 105 cm lift
TyreON TPH60T-1 pneumatic high lift jack 60 ton >>

► 80T  2 stage - min. 23 cm long chassis 
TyreON TPH80T-2 80 ton air hydraulic axlejack >>

Draagbare lucht hydraulische garagekrik