+31 (0)72 - 54 01 002
  1. Home
  2. Products
  3. Truck air hydraulic jacks
  4. TPH50T-3H Air hydraulic jack 50 Tons

TPH50T-3H Air hydraulic jack 50 Tons

Capacity 50T pneumatic floor jack
3-stage jack 50T - 30T - 15T
Lifting height 22 cm - 65,1 cm
Model Long chassis - Long Bar
Weight - Total length 63 kg - 203 cm
Application Intensive commercial use
Delivery includes Extensions 80 + 40 + 20 mm
Hydraulic oil is filled
Pneumatic floor jack for safe lifting of trucks, trailers, commercial vehicles, buses, construction and industrial machines, agricultural vehicles and forklifts.

With the minimum height of 20 cm, almost every lifting point can be reached. Thanks to the lifting height of 65 cm, the pneumatic hydraulic truck jack is also suitable for vehicles with high axles.
Accessories trucktyre mounting
AIW3260 Nm 1 Inch impact wrench with long shaft
€495,-
Drive Square 1 Inch
Breakaway torque 3260 Nm / 2400 ft lbs
Anvil 20 cm - 8 Inch
Available from stock
More information
The price is excluding tax and delivery costs
Accessories trucktyre mounting
AIW2180 Nm 1 Inch impact wrench with long shaft
€350,- €395,-
Drive Square 1 Inch
Breakaway torque 2180 Nm / 1600 ft lbs
Anvil 20 cm - 8 Inch
Available from stock
More information
The price is excluding tax and delivery costs
Package offers
Certified pneumatic floor jack
CE approved: EN 12100:2010 Safety of Machinery + EN 1494:2000+A1:2008 Mobile or Moveable Jacks

Application under all conditions - Factory test
Metal shrinks and expands due temperature changes. A TyreON pneumatic floor jack will not fail at extremely low or high temperatures.
The pneumatic truck jack has undergone load testing at -25 ° C to + 45 ° C, and static and dynamic off-center load safety tests have also been done.

High quality pneumatic hydraulic truck jack  - lever with 3 positions
The handle can be locked in 3 positions; 45º-90º and 180º.
The lifting cylinders are resistant to wear and corrosion due internally and externally chrome-plated cylinders.
All lifting cylinders are equipped with 2 industrial seal rings to prevent oil-escape.
3 Stage pneumatic floor jack TPH50-3H from TyreON
Stage 1  50.000 kg   Stage 2  30.000 kg   Stage 3  15.000 kg

This pneumatic floor jack with 3 heavy pistons need 8-12 Bar air to lift loads up to 50,000 kg. TyreON pneumatic truck jacks are easy to operate and have many safety options, such as a joystick with a dead man's control that also controls an evenly slowed fall.
Available from stock
€1.250,- €1.595,-
The price is excluding tax and delivery costs
Request a quote
Get a quick non-binding offer shipping costs included!

Category

Truck air hydraulic jacks

Downloads

Information-request

Interested in the TPH50T-3H Air hydraulic jack 50 Tons? Request an offer.
Request a quote

TyreON TPH50T-3H Pneumatic floor jack - Pneumatic truck jack


pneumatic floor jack         
Capacity pneumatic floor jack 50 Ton  
Minimum height 220 mm  
Lifting height / with extensions 651 mm / 511 mm  
     
Stage 1    50T 101 mm  
Stage 2    30T 94 mm  
Stage 3    15T 96 mm  
Total stroke 291 mm  
     
Width of the base - profile 195 mm / 265 mm  
Total length of the pneumatic truck jack 2025 mm  
     
Required air pressure 8-12 Bar  (0.8-1.2 Mpa)   
Connection - DIN Euro shortcut 1/4" screw thread  
Package - 67 kg L140 x B25 x H30 cm   

 

  

Available from stock
€1.250,- €1.595,-
The price is excluding tax and delivery costs
Request a quote

Tested before shipment


Each truck air hydraulic jack is functionally tested before it is packed with its documentation.

TyreON pneumatic floor jack - Functionality & Safety


  • Dead man's control  -  When the hold-to-run joystick is released, the pneumatic floor jack switches off and comes to a stop immediately
  • Pressure relief valve  -  Prevents damage to the pneumatic truck jack when the load is to heavy
  • Descend the load evenly  -  A pressure reduce-valve ensures an evenly slowed fall, even with the heaviest load
  • Lifts quickly - With a pneumatic high pressure pump
  • Accelerated to the load  -  System to raise the cylinders onto the load at a higher speed and also to lower it quickly without any load
  • Solid chassis  -  Of thick sheet steel, perfect protection of the pneumatic pressure pump and other internal parts
  • Oil circulation  -  For example, if the pneumatic hydraulic truck jack falls on its side, no oil escapes
  • Fixed position and evenly loaded lifting  -  Non-return valves guarantee a fully fixed position with loads at all heights and a controlled even lifting speed under load

 

TyreON Sales /  Verkoop TyreON BV
Molenlei 2 i
1921 CZ Akersloot
The Netherlands (EU)

E-mail:   info@tyreon.eu
 		 T   +31  (0)72 - 54 01 002


Peter Smit - Mobile number
M  +31  (0)6   - 53 701 658
 		 BTW  NL-8584.495.11.B01 (VAT number)
KvK Alkmaar  70762317 (Chamber of Commerce)

Disclaimer
 


webdesign: OrangeTalent