+31 (0)72 - 54 01 002
  1. Home
  2. Products
  3. Truck air hydraulic jacks
  4. TPH60T-4 Air hydraulic jack 60 Tons - Minimum height 15 cm

TPH60T-4 Air hydraulic jack 60 Tons - Minimum height 15 cm

Capacity 60T airhydraulic jack for trucks
4-stage jack 60T - 30T - 22T - 11T
Lifting height 15 - 51.3 cm
Model Long chassis - Long bar
Weight - Total length 66 kg - 225 cm
Application Intensive commercial use
Delivery includes Extensions 75 + 45 mm
Hydraulic oil is filled
Pneumatic hydraulic jack for the safe lifting of trucks, trailers, commercial vehicles, buses, construction and earth moving equipment, industrial machines, agricultural vehicles and forklift trucks.

With a minimum height of just 15 cm, almost every lifting point is accessible. This allows an entire range of vehicles to be jacked up. With a maximum jacking height over 51 cm, vehicles with high axles can be raised.
Truck impact wrenches
AIW3260 Nm 1 Inch impact wrench with long shaft
495 €
Drive Square 1 Inch
Breakaway torque 3260 Nm / 2400 ft lbs
Anvil 20 cm - 8 Inch
Available from stock
More information
The price is excluding tax and delivery costs
Package offer
Package offers
► 2-speed 56 Inch truck tyre changer + 60T 4-stage air hydraulic jack
7.200 € 8.945 €
►Truck tyre changer 56 Inch
►Truck jack 60T - 4 Stages
Available from stock
More information
The price is excluding tax and delivery costs
Multifunctional use
Accessories for lifting equipment
Airpress HK 600-200 Pro air compressor - 10 bar - 4 pk - 3 kW - 539 L/min. - 200L tank
1.250 €
Motor - power 3 kW - 4 hp
Capacity max. / effective 539 / 415 Liters per minute
Air tank 200 L
Available from stock
More information
The price is excluding tax and delivery costs
Package offer
Package offers
► T1000 + TPH60T-4 + TPH50P
8.340 € 10.640 €
►Truck tyre changer 56 Inch
►Truck jack 60T - 4 Stages
►Press 50T air-hydraulic
Available from stock
More information
The price is excluding tax and delivery costs
Package offers

TyreON TPH60T-4 Pneumatic hydraulic jack 60 ton


Air hydraulic floor jack with 4 heavy-duty pistons rated for a maximum of 60 Tons.
This four-stage 60T-40T-22T-11T hydraulic jack requires compressed air from an air compressor to lift heavy loads up to 60 Tonne.
TyreON jacks are easy to operate and are featured with many safety options as dead man’s joystick which also aids controlled lowering speed.

Technology - Quality - Pneumatic hydraulic jack


  • Quality jack with two large rubber wheels and a long handle with soft rubber grips
  • First-class powder coating on entire construction, attractive and functional
  • Minimum jacking height 15 cm and a narrow profile
  • Operates with reliable hold-to-run joystick
  • Shortcut for quick (de)coupling of the air hose
  • The jack can be moved, manoeuvred, raised and dropped using the handle
  • The handle can be locked in 3 positions; 45º-90º-180º
  • The TPH60T-4 has a 222.5 cm long reach
  • High load stability with wide base
  • The robust chassis is made from 4.5 mm steel plate and provides ultimate protection of the internal parts
  • Internal and external hard-chrome cylinders resistant to wear and corrosion
  • Each cylinder is fitted with two seals to prevent any oil loss
  • Fast lifting by means of pneumatic high-pressure pump
  • 2 hooks on the side of the chassis for the extensions
  • A hinged clamp on the chassis
  • Screw cap on the chassis for easy oil change
  • Comes with 2 extensions to close gap between the saddle of the jack and the jacking point

Pneumatic hydraulic jack intended for frequent commercial use


TyreON pneumatic hydraulic jacks are used by garages, workshops, tire services and trade, fleet owners, truck dealers, truck maintenance and (mobile) services, transport companies and the agricultural, heavy machinery and groundwork sectors.

Heavy Duty
The durable heavy duty jacks are designed and made for intensive professional use.
With the sturdy construction and the application of very thick sheet steel, the TPH60T-4 is highly resilient.
Thanks to the process control, the applied technologies and quality materials, these truck jacks have a long lifespan.

With dead man's operation
When the hold-to-run joystick is released, the workshop jack turns off and stops immediately.
This dead man's operation promotes safe working.

Application under all circumstances
The workshop jack can be used both indoors and outdoors under severe conditions and is also safe to use on a surface that is slightly inclined.
Metal shrinks or expands with variations of temperature. A TyreON workshop jack will not fail at extremely low or high temperatures.

Factory Test - Quality Centre
During each step of the production process, the Quality Centre critically examines quality and performs process control.
For example, the workshop jack was tested at -25 °C to + 45 °C and static and dynamic off-centre load tests were conducted to ensure safe operation.

Certified
CE approved, meets all current requirements;
EN 12100:2010 Safety of Machinery + EN 1494:2000+A1:2008 Mobile or Move-able Jacks

Functionality - Pneumatic hydraulic jack 60 ton


Overpressure valve
An overpressure valve prevents damage from excessive loads.

Fast lift to jacking point
The TyreON TPH60T-4 is fitted with a system that allows the lifting cylinders to be raised to the jacking point quickly and then also to be dropped rapidly once without load.

Locked position and lift evenly
The non-return valves guarantee a locked position for loads at any height and a controlled even high lift rate under load.

Equalized descent
A reduction valve ensures equalized and smooth descent, even with the heaviest of loads.

Oil circulation
As the hose, cylinder and oil reservoir are interlinked, the oil circulates and cannot be released, even if the jack should be positioned on its side.
Available from stock
1.450 € 1.995 €
The price is excluding tax and delivery costs
Request a quote
Get a quick non-binding offer shipping costs included!

Category

Truck air hydraulic jacks

Downloads

Information-request

Interested in the TPH60T-4 Air hydraulic jack 60 Tons - Minimum height 15 cm? Request an offer.
Request a quote

The techniques and possibilities of the TyreON TPH60T-4 pneumatic hydraulic jack


  TyreON TPH60T-4 lucht hydraulische werkplaatskrik  

 


Technical information TPH60T-4

Pneumatic hydraulic jack 60 ton

 

      
         
Capacity  60 Tonne      
Minimum height  150 mm    
Lifting height / with extensions 393 mm    
         
Stage 1   60T 57 mm    
Stage 2   30T 60 mm    
Stage 3   22T 61 mm    
Stage 4   11T 65 mm    
Total stroke 243 mm    
         
Width of the base - profile 223 mm    
Width including wheels 280 mm    
Total length of the floor jack 2250 mm    
         
Required air pressure 9-12  (0.9-1.2) Bar  (Mpa)    
Air consumption 300         Litre/minute    
Shortcut DIN Euro coupling 1/4" screw thread  
Package - 70 kg L140 x B25 x H30 cm    

Available from stock
1.450 € 1.995 €
The price is excluding tax and delivery costs
Request a quote

Included in your order


  • TPH60T-4 pneumatic hydraulic jack with wheels and handle
  • Hydraulic oil (Pre-filled with hv-iso-32)
  • 45 mm and 75 mm extension attachments
  • Manual

The final test - the warranty and TyreCare


Every pneumatic hydraulic jack is fully tested at the factory before being packed along with its documentation, ready for dispatch!
The extra low jacks are delivered with a one year warranty.
TyreCARE means that even after the warranty period expires, we stand ready to assist you with technical support and information.

Various models in stock

 

Draagbare lucht hydraulische garagekrik

TyreON Sales & Administration TyreON BV
Molenlei 2 i
1921 CZ Akersloot
The Netherlands (EU)

E-mail   info@tyreon.eu
Office   +31  (0)72 - 54 01 002
 		 Peter Smit
E-mail   tyreon.sales@gmail.com
Mobile - WhatsApp - WeChat
+31  (0)6  - 53 701 658
 		 VAT number   NL-8584.495.11.B01
Chamber of Commerce Alkmaar   70762317
Disclaimer
 


webdesign: OrangeTalent