+31 (0)72 - 54 01 002

TPL5500A 4 post alignment car lift - 4.8 meter runways - 5T

Capacity 5000 kg - alignment
Lifting height 26 - 180 cm
Runways 480 cm long - 50 cm wide
Obstacle protection
Mechanically locked
Automatic electromagnetic unlocking
Lock function - parking function
Pressure relief valve
Rear wheel alignment plates + runway shims
3D alignment and other types of alignment equipment
Short ramps of 100 cm
293 cm between posts, also commercial vehicles / motorhomes
24V limit switch
Cable break protection
Voltage 400V
Drive 2.2 kW electro-hydraulic
Foundation 200 mm
Distance Runways 99 cm - 115 cm adjustable
Wheelbase Max. 465 cm for lifting
Wheelbase Max. 440 cm for alignment
Packaging L510 x B66 x H55 cm - 1750 kg
Optional 2.5T jack L95 x B40 x H27 cm - 115 kg
Control unit Lift, unlock and lower
Solid and safe versatile 4-post alignment lift for intensive use.

  • Slack cable protection (obstacle protection)
  • Front and rear roll-off protection
  • Load-dependent lowering valve
  • Lifting, unlocking, and lowering with an all-in-one 24V controller with dead man's control
  • Very nicely finished and fully powder coated
  • System to adjust the runways with the safety grids exactly level
  • Electromagnetic safety catches, automatically unlocking when lifting and lowering
  • Protected against unwanted lowering, all 4 posts are mechanically locked
  • With height limit switch
  • The ramps can be mounted on both sides of the 4 post lift
  • Steel tank for the hydraulic oil
  • Mechanically synchronized runways with steel cables
  • Lock function: lower the runways into the four mechanical locks, so the hydraulic system is unloaded
    Optional

    TyreON LED8P runway lights 24V LED
    TyreON HV-ISO-32 Hydraulic Oil - 15 L
    TyreON TRJ25ALP rolling jack 2.5T

    The optional rolling jack requires 4-8 bar of compressed air, which is why the car lift comes with a central connection point for air.
  • Standard features - 4 post car lift

    • Columns and runways made of heavy rolled profile
    • One powerful hydraulic cylinder is fitted under the runway, perfectly protected
    • Large running wheels made of hard steel to prevent wear of cables and running wheels
    • Main switch on the controller
    • With a valve on the pump unit, the carlift can be lowered manually (in case of power failure)
    • The 4 post lift is equipped with grease nipples

    Available from stock
    3.950 € 4.750 €
    The price is excluding tax and delivery costs
    Get a quick non-binding offer shipping costs included!

    Information-request

    Interested in the TPL5500A 4 post alignment car lift - 4.8 meter runways - 5T? Request an offer.
    Available from stock
    3.950 € 4.750 €
    The price is excluding tax and delivery costs

    Connection value - 4 column alignment lift

    • Connection value: 400V / 3 Phase
    • Power of the drive motor: 2.2 kW
    • Required air connection: 6 - 8 Bar (for the optional rolling air hydraulic rolling jack TyreON TRJ25ALP)

    Delivery - 4 column alignment lift

    The TyreON TPL5500A 4 post alignment lift is first tested for all functions and then packed together with

    • Hydraulic power unit and controller
    • Wiring and installation materials
    • Installation and operating manual
    • Rear wheel alignment plates (pre-assembled)
    • Complete set of runway filler plates (front-side)
    • Obstacle protection (pre-assembled)
    • Electric release (pre-assembled)