+31 (0)72 - 54 01 002

TSC3500X2s full rise scissorlift car - mechanical lock - extra wide and long lifting tables - completely graphite gray

Capacity 3500 kg - On floor
Lifting height 10,5 - 198 cm
Platform length 148,5 - 210,5 cm
Drive 2.2 kW Electric-hydraulic
Type Fully automatic
Mechanical safety lock
Compressed air is required
Auto-stop at 30 cm + slow descend
IR synchronization monitoring
Own weight 950 kg
Quick and easy to install
Broken hose protection
Including Floor bolts
A coded hydraulic hose set
Package L220 x W75 x H85 cm - 1045 kg
Voltage 400V or 230V
Full rise scissorlift for short to extra-long passenger cars, delivery vans, light commercial vehicles and busses.

Low profile of just 10.5 cm.
Simple to use and maintain and ideal for limited space.

With four powerful hydraulic cylinders and a tip-lever lifting system for lifting with full force from the lowest point.

Safe double scissor lift, solid construction, for professional use. Fully automatic lifting and lowering at the touch of a button.

Synchronization monitoring - IR light barrier
The car lift stops immediately at a 15 mm height difference between the two platforms or if a person walks between the platforms during lifting or lowering..

TyreON TSC3500X2s
Professional full rise scissorlift - Fully automatic

Double scissor lift with all conceivable options
 

  • Controller with hydraulic pump unit
  • The ramps can be fixed horizontally for long vehicles up to 3.5T
  • Easy access due to the 66 cm wide platforms and ramps with anti-slip profile
  • Also suitable for low ground clearance vehicles
  • Significant 200 cm lifting height
  • Comes standard with 4 rubber lifting blocks
  • Variably positionable 24V all-in-one controller
  • Lots of space btween lifting tables, up to 90 cm
  • Tip-lever-lifting system and 2 powerful hydraulic cylinders per platform
  • Solid steel scissors
  • Lock function
  • Auto-stop at 30 cm height
  • Acoustic and optical warning signal when descending from 30 cm
  • Mechanical safety locks every 5 cm
  • Automatic pneumatic release
  • Lifting platforms - hydraulically synchronized - up and down simultaneously (Master-Slave cylinder follow principle)
  • Electronic synchronization monitoring by means of a IR photocell
  • Height switch - stops the hydraulic pump unit when the car lift reaches the highest point
  • Central check valve - prevents the lift from dropping in the event of oil pressure failure
  • Pressure relief valve - prevents damage to the car lift when overloaded
  • Procedure for lowering in the event of a power failure
  • Suppluied with installation material, hydraulic hose set and floor cover channels


Full rise scissorlift - Floor mounted

This flat full rise scissorlift is bolted to the floorsurface and connected to the controller.
This neatly finished double scissor lift has a long technical life due to the applied process techniques, careful assembly and the use of first-class materials.

Full rise scissor lift car - Professional heavy duty version

The wheel free car lift is compact and optimal for all maintenance and repair work on vehicles.

  • The hydraulic working pressure (upward force) and the lowering speed can be adjusted
  • Reinforcement profiles on the inner sides of the lifting tables
  • Protective caps on the lifting cylinders
  • Lifting platforms and ramps made of thick sheet steel
  • Finished with powder coating
  • On-off main switch with indicator light on control panel
  • Floor requirement 15 cm concrete
  • Simple bleeding of the hydraulic system and easy leveling of the platforms at installation
Available from stock
198 cm lifting height
€2.995,- €3.595,-
The price is excluding tax and delivery costs
Get a quick non-binding offer shipping costs included!

Information-request

Interested in the TSC3500X2s full rise scissorlift car - mechanical lock - extra wide and long lifting tables - completely graphite gray? Request an offer.

TyreON TSC3500X2s full rise scissor lift car




Technical details  full rise scissor car lift 

       
Lifting capacity 3500 kg    
Maximum lifting height 198  (194 without rubber blocks) cm    
Initial drive on height 10,5 cm    
Time lifting / lowering 40 / 30 sec    
Platform length 148,5 - 210,5  (ramps up) cm  
Width platforms 66 cm    
Space between the lift platforms Up to 90 cm (with the supplied hose set)      
         

Other information

       
Type Electric - Hydraulic      
Engine power 2,2 kW    
Required air pressure 4 - 8 Bar    
Hydraulic working pressure 28 / 280 Mpa / Bar    
Voltage (50Hz) 230/1Ph  or  400/3Ph Volt    
Fuse amperage  16  or  20  Ampere    
Noiselevel car lift <= 70 dB    
Dimensions controller  L32 x-W29 x H107 - cm      

Available from stock
198 cm lifting height
€2.995,- €3.595,-
The price is excluding tax and delivery costs

Maintenance - Lock function - scissor car lift


The full rise scissorlift can be lowered into the safetylocks by the lock button. A car can be parked at height while the lift rests solely mechanically.
To maintain the pneumatic system, the air connection comes with an oil evaporator and a water separator.

Delivery of the full rise scissor car lift


The full rise car scissor lift and the controller are tested for all functions and packed together with:
 

  • The installation and operating manual
  • Set of floor bolts
  • A coded hydraulic 400 bar hose set + accessories
  • Set of protective floor cover channels for the hoses
  • 4 rubber lifting blocks, height 4 cm
  • Hydraulic oil is not included - 15 liters HV-ISO-32 can be ordered along